Monitoring the Hotwire DSLAM
Table
Socket Statistics |
|
|
|
Displays information for the interface. Enter the socket name from the active socket list to view information on the application assigned to the specified socket number.
Start Socket ± Enter the socket number to start the active socket list.
Active Socket List ± This is the heading information for the following fields. It lists all the information about the currently selected socket.
In addition, the lower
Socket ± Socket number.
Socket name ± Internal name of the socket.
Family ± Family of this socket (DARPA Internet).
Type ± Socket type (stream or datagram).
Local ± Port number on this card.
Remote ± Port number on remote card.
State ± Current state of the socket.
Input Bytes ± Bytes waiting in the socket for the owning application to process (will go to 0 when processed by the application).
Send Bytes ± Bytes waiting to be sent out to the remote machine.
PDU Drops ± Incoming packets dropped (usually due to a lack of space). Byte Drops ± Outgoing packets dropped (usually due to a lack of space).
UDP Statistics |
|
|
|
Displays information on User Datagram Protocol (UDP) statistics.
The counters increment in real time and you may enter
Output Packets ± Number of UDP packets sent out of the card.
Input Packets ± Number of UDP packets coming into the card.
No Receive Port ± Number of UDP packets coming into the card that had no receive port waiting for this packet.
Unchecksummed ± Number of UDP packets coming into the card that had no checksum.
Header Error ± Number of UDP packets coming into card that had an error with the packet header.
Incorrect Checksum ± Number of UDP packets coming into the card that had a bad checksum.
Bad Length ± Number of UDP packets coming into the card that are an illegal length (too short).
Other Error ± Number of UDP packets coming into the card that had an error, but not one of the above.
May 1998 |
|
