Paradyne 8310 MVL, 8510 DSL manual Procedure, 1. Card Status Options 1 of

8310 MVL and 8510 DSL Card Configuration

NOTE:

Only a user who logs on to the Hotwire DSLAM with Administrative permission can configure the DSL card.

"Procedure

To configure card information, time/date, clear NVRAM, upload or download configuration sets, download new firmware, or reset card:

1.Follow this menu sequence: Configuration → Card Status (A-A)

2.The Card Status menu appears. Enter the desired value on each selected screen and field as shown in Table 5-1 and press Return.

Table 5-1. Card Status Options (1 of 3)

Card Info (Card Information) A-A-A

Gives the user the ability to configure basic card-level information.

Card Name ± 16 alphanumeric characters. Name assigned to the card.

Card Contact ± 32 alphanumeric characters. Name or number of party responsible for card.

Card Location ± 16 alphanumeric characters. Location assigned to the card.

Local Control Terminal Port Mode ± Standard/Extended (Default = Standard). Standard is for USA keyboards; Extended is for European keyboards.

Remote Control Terminal Port Mode ± Standard/Extended (Default = Standard). Standard is for USA keyboards; Extended is for European keyboards.

Telnet daemon tcp port ± 0±65536 (Default = 23). If you change this field, you need to do a card reset.

Time/Date A-A-B

Gives the user the ability to configure the local time and date on the DSL card.

Local Time/Date ± Enter the time in hh.mm format (am or pm). Enter the date in mm/dd/yy format.

NOTE: At system boot time, the time on the DSL cards automatically synchronizes with the MCC card.

NVRAM Clear A-A-C

Gives the user the ability to clear out the Non-Volatile RAM (NVRAM) in order to reuse the card or to reconfigure the current card.

CAUTION: If you select yes on this screen, you will permanently remove most of the configuration information you have stored on this card. The system will perform a reset and return to the factory configuration.

5-2 May 1998 8000-A2-GB26-00