Ricoh NC5006 manual About Copying, Available film Area For Copying

BEFORE OPERATING THE PROJECTOR

About Copying

When using the Slide Film Holder When using the Strip Film Holder

Available film

area

for

copying

~[~;[

21.5

mm

~1

::-

I

The copy size when Full

;

.;~;

;;

-~1

-

Size is selected.

124mm

I

I

1

I

~

19:6Tm

-M

~

*o;,8T”

~

I

I

,

I

~

A black line might

appear on the edge of copies,

This

::;:.:~<:::~fi.yt~~.~fi+f

line is

caused

by

the

holder

or the

edge

of

the film.

.. .

. ..

Black line

.................................................. .....

.........:.~.:...:........................:.:w. .:.:.:.:....:?:/.:.?..

:.::::::::::::::::.o..............:.:............:::::.-.:..:..<

~::.:.>~:.~.:.~.:.:.:.:.:.:.~<

..................................

+

IJ

As the

fresnel

lens is

used,

a ring

pattern

on the

center

or

:.:.::::::::::::::::::::::::::::::::::::::~:*..

.....................................................................................................,

.........................................................

5

moire pattern might appear on the

copy

image.

~::*:::::::~.:::::::;.::f

+Tl

.:.~.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.>

........................................... ::.. .

....,

*

1

1

Notes For Operation

IJ First, you must perform shading to get the projector to register the condition of the film, This way, the projector can adjust the light intensity automatically while copying.

c1 You can adjust the color balance and color density manually.

c1 This projector has an automatic focus function, but if you use the glass mount film holder, adjust the focus manually,

IJ The shading method differs depending on the type of film (negative or positive). When making copies from a positive film, make sure to set the film after shading.

c1 The filter and the way to set it differ depending on the type of film,

c1 If you want to clear the data you just entered, touch the Cancel key. The screen returns to the previous page.

IJ If you want to go to the next page, touch the Exit key,

IJ If you are finished using the projector unit, press the Clear Modes/Stand by key.

IJ Do not forget to turn off the power switch of the projector when you are not using it,

n Do not obstruct the light path from the projector. If the light path is obstructed, the image might not match the original,

c1 The shading adjustment is very sensitive, so after the shading operation the mirror unit must be kept perfectly still. Do not move it or allow vibrations to interfere with it. If this happens during copying, lines might appear on the copy. In that case, you must perform shading again.

IJ To avoid the above problem, avoid touching or leaning on the copier or the projector after shading. Do not put anything on the copier while it is operating.

c1 If you need to open and close the doors (to clear a jam or add toner), we recommend that you perform shading again aftetvvards.

c1 Avoid multi-wiring. The projector should be connected to a power source as described on the inside of the front cover.

10-5