Ricoh NC5006 manual Push the tray in until it stops

4.While pressing the left guide release lever, slide the left guide to the paper size you want to use.

Cl Make sure that the release lever is locked in the correct position,

5.Select the paper size by adjusting the paper size selector on the rear side of the tray.

6. Load Paper.

Cl The paper stack must be flush with the right side of the tray,

~Do not stack paper over the limit mark.

Cl Make sure to read the notice on the pack- age showing the front copy side. The copy side should be loaded down.

7.Push the tray in until it stops.

~Push the tray gently; otherwise the paper guides might move, possibly leading to paper being in the wrong position and to paper scewing.

3-9