Copying Speed Full Color Scans, QA4/A3 Version | Ricoh NC5006

Warm-up Time:

First Copy Time: (A4 or 81/2” x 11”)

About 8.5 minutes (at 20”C or 68”F)

●Full Color (4 scans): 15.5 seconds s Single Color:

Black.Yellow,Magenta,Cyan: 9.O seconds

Red,Green,Blue, Orange,Light Green: 11.0 seconds

0 When selecting OHP/Thick Paper modes, copying speed is reduced.

~After changing some modes, the first copy time will take longer than usual.

Copying	Speed:	● Full Color	(4 scans):
(Standard	modes)	A4~or	81/2” x 11” c: 6 copies/minute
		A3 or 11” x 17“:3 copies/minute

●single COIOr(Black,Yellow,Magenta,Cyan): A4~or 81/2” x 11” ~: 31 copies/minute A3 or 11” x 17”:15 copies/minute

●Single COIOr(Red, Green, Blue, Orange, Light Green):

A4~ or 81/2” x 11“D10 copies/minute A3 or 11” x 17“:5 copies/minute

Cl When selecting OHP/Thick Paper modes, copying speed is reduced.

Non-reproduction Area:			QLeading edge: 5f2 mm or 0.2’’f0. O8°
			● Side: 2i2 mm or 0.08’’tO.O8”, Total less than 4 mm or 0.16“
			● Trailing edge: 2t2mm				or 0.08’’~0. O8°
Copy	Number	Input:	Number	keys, 1 to 99
Automatic Reset:			1 minute	standard		setting; can also			be set to 10 to 999
			seconds in 1 second steps, or to no auto reset.
Paper	Feed:		Paper Tray		x 3 (500 sheets of paper each)
			Bypass Feed Tray (50 sheets of paper when lighter than
						104.7g/m2		or 28	lb)
Copy	Tray Capacity:		100 sheets		of paper
Toner	Replenishment:		Bottle type		(340g/bottle)
Reproduction		Ratio:	QA4/A3	version:		25Y0, 50?40, 65%,			71 yO, 75$X0,82Y0, 93Y0,
						100%	(Full	Size),	115’ZO,122%, 141 ‘XO,
						200?4.,	400%	+ User ratio x 2
			. LT/DLT version:			25Y0,	50Y0,	65?40, 74Vo, 77$Zo85?40, 93?40,
						100% (Full Size), 121%, 129%, 155Y0,
						200?40, 400%		+ User ratio x 2
Zoom:			From 25% to 400% in 1% steps

11-3

Image 153

Ricoh NC5006 manual Copying Speed Full Color Scans, QA4/A3 Version, 100% Full Size, LT/DLT version

Contents

Page Page Page Page Page Page Page Page Chapter Table of Contents Safety During Operation Safety InformationAre suppled Electrical General Safety Information Power Connection Installation RequirementsCopier Environment Environments To Avoid Access To Copier Clean the touch panel display with a dry soft cloth Daily MaintenanceCopier Touch Panel Display Display Editor Option Dual Job Feeder OptionBelt Feed-in Unit Usage Tab/e of ContentsPage Page Page Page Page Page Page Page Page Page Page Page Page Page Guide to Components Switches the copierMachine Exterior Originals for copyingPage Page Page Page Page Page Page Page Page Adding Toner Loading Paper on the Paper Tray . . , . m Use of Copy Paper USE and Storage of SuppliesPaper Storage Non-recommended copy paper C1 Do not lay anything heavy on toner Toner Storage Loading Paper on the Paper Tray Push the tray in until it stops Insert the paper until it stops Setting Paper on the BY-PASS Feed Tray Check the label on the package, or contact LT/DLT Changing Paper Size and Direction Push the tray in until it stops Adding Toner Do, toner may scatter Adding Toner Setting Originals CopyingOther Basic Operations Setting Originals On The Exposure Glass Setting OriginalsIf your machine is equipped with the platen cover If your machine is equipped with the dual job feeder Recommended Originals Setting Originals In The Dual Job Feeder Dicator is lit before setting Setting a Stack Of Original ADF/ARDF modeAdjust the original guide to the original size Non-recommended Originals Feeder until the Insert Original in- dicator goes off Set originals face up into the dual job +&b Setting One Original At a Time Sadf mode Repeat steps 5 and 7 until copying is completed How To Make Copies Copying@/c = Full Color mode Standard Copy Job SettingsManual Image Density mode Image Density Adjustment Auto Letter/Photo mode Presetting Copy Jobs During a Copy Run Changing / Canceling Preset Copy JobsYou can set the copy settings for your next job Preset mode Canceling a Selected Copy Job Setting Finish Setting Data Or Selecting ModesOther Basic Operations Checking And Changing The Selected Copy Jobs Stopping The Copier During a Copy Run When storing Copy Job settings Into machine Saving Job Settings For Future UseTurning The Touch Panel Display OFF/ON You can store up to 5frequently Display ~ Display Editor Basic OperationDisplay Key Keys Canceling The Previously Marked Point Advanced Functions Contents Sided Copy From Original Two Color Conversion Erase BackgroundOutline Image Full Color Copy Key=2 Color SelectionAuto Color Select Key=l Black COpy Kq=q Combined Auto & Manual Image Density Selection Image Density AdjustmentManual Image Density selection ImtwDmih Letter mode Key.s Auto Letter/Photo mode Key=Original Image Type PHOTO/LETTER Selection Auto Paper Selection Kw=l Copy Paper SelectionManual Paper Selection Keys =2 By-pass Feed Selection Key= Standard paper DHP Stacking K,Y.2 SORTING/STACKING1st bin 3rd bin Auto Reduction/Enlargement Kw1 Standard Reduction EnlargementFixed Reduction/Enlargement ~0 KeYs.3+4 Fnmt R/El Se Iect Md~s Selected when you enter the lengths Adjust the reproduction ratio by using the +and keys+ and keys Number keys Size Magnification Special Reduction EnlargementInput Size Magnification You can enlarge the complete image onto several sheets YOInput Margin Adjustment Keys =l+3 Image ShiftingCentering/cornering KeYs=l+2 Erase Center Keys +2 Erasin G CENTER/BORDERErase Border Keys= 1+3 Erase Center And Border KeYs.1+4 Izmllj Series Copying From 2-sided original to two l-sided copy Combine Two Original~This function makes 1-sided copies from ~-sided originals SE Iect tmdes Color Creation Color Background w,.= l+...,,,,I,J,J Color Erase VQ,,.l+,onpage,-l Image Creation Positive/Negative Image Ke~s=l+3This function copies only the outline of the image This function makes a mirror image copy of the original LOVE+ lbOVIElbo~’1~ Part of the original image is copied repeatedly Size Input Optional display editor is required for editor input method Number of Images Chapter Sharp/Soft Image AdjustmentContrast Background Density Control Sampling The Color Balance Key =1 Color Balance Adjustment Color Balance Memory Key= 1on Color Balance AdjustmentIll Are loaded in this machine ?dwd -J..-EEl Single Color Adjustment Scanning n a Color User Color MemoryTouch the key to which You want to store the color Mixing Colors Manually Area Editing What is Area Editing Up to 6 areas can be designated Creative Editing Cl Zoom 0 0 0 0 0 0 0 0 0 0 0 0 0 0Xoooooo Color Creation Color Background Color Editing What is Area Editing 010 Area Editing Basic Operation Designating Areas Designated area can be one of four shapesRectangle a rectangle of designated size Editor. I= page 4-I To Designate An AreaClose Point key Right Angle Polygon RectanglePolygon Closed Loop JOB Settings for Inside the Area Select An area or Press IT7 Use same tn~des as =‘age’-’ 12!El Iack= Ecl Paint modeColors Pattern of a previous group Creative Editing Color Editing Select modes for outside all the designated areas Color Editing Checking JOB SettingsPress Start key Or select area key to check or change modes Changing JOB Settings for the Entire Image Functions only for Area Editing User TOOLS/USER Code C1-lAIUGING Default Settings User Tools Menu How To Access The User ToolsPress the Clear Modes/Stand by key Menu I U= to return to the User tool menu Auto Reset Screen Saver Sadf Auto reset ~ Auto ResetSet Operation Modes Set Bypass Paper Size Adjustment SensitivityAuto L/P Auto Color Select Thin Paper ~ 5 Select ARDF/SORTER modesColor Copy Sorting Prohibition ~~ Check/Reset Specified Copy Counter ~1 Set User Code Mode~~ Reset All Copy Counters ~~ Set User Codes User Remarks REMARKS/PROBLEMS User Remarks What to do When Things GO Wrong Clearing MisfeedsOthers Copies are too light Copies are dirty Copy image is blurred Problem Copy image is blurredColor tone of copies is not reproduced well Moire is reproduced on copies 10-4 10-5 10-1110-19 Not using Dust, close it when you areSet the holder here Switches the power on or OFF Plug the power cord to a wall outlet Use to clean the lens or glass Use to fix the film after setting it in the holderFilm Holders /Set 35mm film in one These holders Use to make a About Film Before Operating the ProjectorNot use the same film for more than 30 minutes You can use the following kinds of films Copy size when Full Size is selected 124mm About CopyingAvailable film Area For Copying Insert the plug of the projector into the wall outlet Projector in Position Before operation, prepare as follows Selecting The FilterPOsilivG ’ositive Close the holder and lock it as shown in the illustration Selecting The Base Film If Needed Setting Films In The Holder If Needed Slide Holder/Glass Mount Film HolderFilm Strip Holder 1o-1o Cutting The Film Position Sheet If Needed Press the Option key Selecting FilmsTouch the Projector key Check the type of film and touch one of the keys Touch the Shading key II Slide Holder/Glass Mount Film Holder/Film Strip Holder Shading Exposure glass UPositiveFilmPO~itiveFilm Under The Lens UnderLens IINegativeFilm UnderLens Negative Film Under The Lens Check the film size, touch one Keys, and touch the Exit key Color Tones In Film Scanning Yellow755Magenta444 Cyan355 Image Density Adjustment Crease key or Decrease keyTouch the Manual Focus key Selecting Copier Functions Select the modes you want to chooseAfter copying, you can select the next job as follows Turn off the power switch Exiting Projector ModeProiector Close the lens cover Hints 10-22 Exterior Blow off any dust using the blower brushFilm Holder Holder Slot Optional Equipments Main Frame Copier11-2 11-5 Gradations Original Type IJ Specifications are subject to change without noticeAvailable Copy Paper Size 256 QA4/A3 Version Copying Speed Full Color Scans100% Full Size LT/DLT version = Copier + Dual Job Feeder +Sorter + Display Editor + Holder Power Consumption Cl Specifications are subject to change without noticeDual Job Feeder Top Bin Capacity SorterA4 or 81/2 x Print Bin Capacity 500 A4 or 81/2 x Sheets Other size Interrupt Bin Capacity 100 Display Editor Maximum A3cJ, or 11 x 17~ Scanned through the copierLCD Monochrome, 8 gradations 640 X 480 dots Projector Unit