Ricoh NC5006 manual Selecting The Base Film If Needed

PREPARING FOR COPYING

Selecting The Base Film (If Needed)

D When you use negative film for copying, use that film’s appropriate base film for shading.

1. Confirm the manufacturer, model name, and ASA rating of the film you want to use.

2.Select a base film suitable for the film to copy.

c1 The following base film slides have been prepared as accessories.

*1 For FUJICOLOR SUPER HG-1OO

9 For AGFA XRG-100

9 For KODACOLOR GOLD-100

c1 *1 is a re~istered trademark of FUJI PHOTO CdMPANY LIMITED.

*2 is a registered trademark of AG-

FAGEVAERT AG.

*3 is a registered trademark of EASTMAN KODAK COMPANY,

IJ If you use film that does not have suitable base film, you should make the base film yourself (u= page 10-21 .).

3.	Open the film	strip	holder and set the	1.//-
	base film in the film strip holder.
	c! The base film	must	be set sideways in the
	strip holder,

IJ There is no difference between both sides of the base film.

nYou can set the negative strip film at the same time. (= page-l O-9 “Se#ingFi/ms h The Ho/det’)

4.Close the holder and lock it as shown in the illustration.

10-8