SHADING

uPositiveFilmPO~itiveFilm Under The Lens UnderLens

1.Insert the “P”(Positive) filter (= page 10-9) in the left slot as shown in the illustration.

~Becarefulto insert the filter as shown, not the other way around..

2.Cut the positioning sheet to match the film size. (= page 10-10 “Cutting The Film Position Sheet” )

3.Place the positioning sheet under the mirror unit (on the exposure glass).

B Placethe marked corner of the film posi-

tion sheet at the rear left corner of the

exposure glass.

D Before going to the next step, make sure that the fresnel lens is lowered in position.

4. Touch the Shading key.

k!E!!dl

D The copier will start shading automat- ically.

5. Lift the fresnel lens, place the film in- side the film position sheet, and lower the fresnel lens.

0 Place the film face down.

Cl If the film is curled, the copy image may be out of focus. In this case, make the cutout film position sheet a little smaller than the film size and use it to hold the film down.

6.Check the film size, touch one of the keys, and touch the Exit key.

10-14

Page 141
Image 141
Ricoh NC5006 manual UPositiveFilmPO~itiveFilm Under The Lens UnderLens, Exposure glass