To Designate An Area, Editor. I= page 4-I, Close | Ricoh NC5006

DESIGNATING AREAS

Notes for designating areas:

IJ Before selecting the shape for designating the area, check which functions can be applied for each shape in the tables (- pages 7-3and 7-6),

cl Do not designate an area which overlaps part of another area.

In Creative Editing mode, the job settings specified for the area designated last will be applied for the overlapped portion.

In Color Editing mode, the job settings might not function as specified.

c1 The more areas you designate, the more time copying will take.

c1 If you designate an area in Right Angle Polygon mode, make sure to mark points that make right angles. If you mark a point which does not match for making a right angle, the editor will automatically specify the point to make it a right angle.

c1 If you mark a line and it overlaps another line you previously marked, the last point you marked will be canceled automatically.

c1 Because the display editor scans at 100 dpi, the inner side of curved outline might be jagged.

c1 Under the following condition, the machine might not detecta closed loop area completely.

●The outline is thinner than 0.5mm or 0.02 inch.

●The outline is not completely closed, it is too light to detect, or the thickness is uneven.

. The outline is not black.

●The space between outlines is too small.

c The outline is jagged.

c1 To paint adjacent areas well, select them right to left, then top to bottom. If areas are not designated in that order, white lines might appear between two adjacent areas. This is especially important for pie charts.

pi+pi

)((White lines might appear)

O (Better result)

~ For column charts, place the original so that the columns are oriented in the same way as paper moves.

~1+~

)((White lines might appear)

O (Better result)

To Designate An Area

Before designating areas, refer to the key functions and basic operation of the display

editor. (I= page 4-I 4)

r\

+c

+._ *&		,.	. . c
.?		.
.?	/	‘i
\	/	‘i	>Close	key
		Point key
Cursor		key

7-11

Image 107

Ricoh NC5006 manual To Designate An Area, Editor. I= page 4-I, Close, Point key

Contents

Page Page Page Page Page Page Page Page Chapter Table of Contents Electrical Safety InformationSafety During Operation Are suppled General Safety Information Environments To Avoid Installation RequirementsPower Connection Copier Environment Access To Copier Touch Panel Display Daily MaintenanceClean the touch panel display with a dry soft cloth Copier Feed-in Unit Dual Job Feeder OptionDisplay Editor Option Belt Usage Tab/e of ContentsPage Page Page Page Page Page Page Page Page Page Page Page Page Page Originals for copying Switches the copierGuide to Components Machine ExteriorPage Page Page Page Page Page Page Page Page Adding Toner Loading Paper on the Paper Tray . . , . m Non-recommended copy paper USE and Storage of SuppliesUse of Copy Paper Paper Storage C1 Do not lay anything heavy on toner Toner Storage Loading Paper on the Paper Tray Push the tray in until it stops Insert the paper until it stops Setting Paper on the BY-PASS Feed Tray Check the label on the package, or contact LT/DLT Changing Paper Size and Direction Push the tray in until it stops Adding Toner Do, toner may scatter Adding Toner Other Basic Operations Setting OriginalsCopying If your machine is equipped with the dual job feeder Setting OriginalsSetting Originals On The Exposure Glass If your machine is equipped with the platen cover Recommended Originals Setting Originals In The Dual Job Feeder Non-recommended Originals Setting a Stack Of Original ADF/ARDF modeDicator is lit before setting Adjust the original guide to the original size Feeder until the Insert Original in- dicator goes off Set originals face up into the dual job +&b Setting One Original At a Time Sadf mode Repeat steps 5 and 7 until copying is completed @/c = How To Make CopiesCopying Auto Letter/Photo mode Standard Copy Job SettingsFull Color mode Manual Image Density mode Image Density Adjustment You can set the copy settings for your next job Preset mode Presetting Copy Jobs During a Copy RunChanging / Canceling Preset Copy Jobs Checking And Changing The Selected Copy Jobs Finish Setting Data Or Selecting ModesCanceling a Selected Copy Job Setting Other Basic Operations Stopping The Copier During a Copy Run You can store up to 5frequently Saving Job Settings For Future UseWhen storing Copy Job settings Into machine Turning The Touch Panel Display OFF/ON Keys Display Editor Basic OperationDisplay ~ Display Key Canceling The Previously Marked Point Advanced Functions Contents Outline Image Sided Copy From Original TwoColor Conversion Erase Background Black COpy Kq=q Color SelectionFull Color Copy Key=2 Auto Color Select Key=l ImtwDmih Image Density AdjustmentCombined Auto & Manual Image Density Selection Manual Image Density selection Selection Auto Letter/Photo mode Key=Letter mode Key.s Original Image Type PHOTO/LETTER By-pass Feed Selection Key= Copy Paper SelectionAuto Paper Selection Kw=l Manual Paper Selection Keys =2 Standard paper DHP 3rd bin SORTING/STACKINGStacking K,Y.2 1st bin Fnmt R/El Se Iect Md~s Standard Reduction EnlargementAuto Reduction/Enlargement Kw1 Fixed Reduction/Enlargement ~0 KeYs.3+4 Number keys Adjust the reproduction ratio by using the +and keysSelected when you enter the lengths + and keys Size Magnification Special Reduction EnlargementSize Magnification Input You can enlarge the complete image onto several sheets YOInput Centering/cornering KeYs=l+2 Margin Adjustment Keys =l+3Image Shifting Erase Center And Border KeYs.1+4 Erasin G CENTER/BORDERErase Center Keys +2 Erase Border Keys= 1+3 Izmllj Series Copying This function makes 1-sided copies from ~-sided originals From 2-sided original to two l-sided copyCombine Two Original~ SE Iect tmdes Color Creation Color Background w,.= l+...,,,,I,J,J Color Erase VQ,,.l+,onpage,-l This function copies only the outline of the image Image CreationPositive/Negative Image Ke~s=l+3 This function makes a mirror image copy of the original LOVE+ lbOVIElbo~’1~ Part of the original image is copied repeatedly Size Input Optional display editor is required for editor input method Number of Images Chapter Background Density Control Image AdjustmentSharp/Soft Contrast Sampling The Color Balance Key =1 Color Balance Adjustment Are loaded in this machine Color Balance AdjustmentColor Balance Memory Key= 1on Ill ?dwd -J..-EEl Single Color Adjustment You want to store the color User Color MemoryScanning n a Color Touch the key to which Mixing Colors Manually Area Editing What is Area Editing Up to 6 areas can be designated Creative Editing Cl Zoom Xoooooo 0 0 0 0 0 0 0 0 00 0 0 0 0 Color Creation Color Background Color Editing What is Area Editing 010 Area Editing Basic Operation Rectangle a rectangle of designated size Designating AreasDesignated area can be one of four shapes Point key To Designate An AreaEditor. I= page 4-I Close Closed Loop RectangleRight Angle Polygon Polygon JOB Settings for Inside the Area Select An area or Press IT7 Use same tn~des as =‘age’-’ 12!El Iack= Pattern of a previous group Paint modeEcl Colors Creative Editing Color Editing Select modes for outside all the designated areas Or select area key to check or change modes Checking JOB SettingsColor Editing Press Start key Changing JOB Settings for the Entire Image Functions only for Area Editing User TOOLS/USER Code C1-lAIUGING Default Settings Menu I U= to return to the User tool menu How To Access The User ToolsUser Tools Menu Press the Clear Modes/Stand by key Set Bypass Paper Size ~ Auto ResetAuto Reset Screen Saver Sadf Auto reset Set Operation Modes Auto L/P Auto Color Select AdjustmentSensitivity Sorting Prohibition ~ 5 Select ARDF/SORTER modesThin Paper Color Copy ~~ Set User Codes ~1 Set User Code Mode~~ Check/Reset Specified Copy Counter ~~ Reset All Copy Counters User Remarks REMARKS/PROBLEMS User Remarks Others What to do When Things GO WrongClearing Misfeeds Copies are too light Copies are dirty Moire is reproduced on copies Problem Copy image is blurredCopy image is blurred Color tone of copies is not reproduced well 10-19 10-4 10-510-11 Plug the power cord to a wall outlet Dust, close it when you areNot using Set the holder here Switches the power on or OFF Use to make a Use to fix the film after setting it in the holderUse to clean the lens or glass Film Holders /Set 35mm film in one These holders You can use the following kinds of films Before Operating the ProjectorAbout Film Not use the same film for more than 30 minutes Available film Area For Copying Copy size when Full Size is selected 124mmAbout Copying Insert the plug of the projector into the wall outlet Projector in Position ’ositive Selecting The FilterBefore operation, prepare as follows POsilivG Close the holder and lock it as shown in the illustration Selecting The Base Film If Needed Film Strip Holder Setting Films In The Holder If NeededSlide Holder/Glass Mount Film Holder 1o-1o Cutting The Film Position Sheet If Needed Check the type of film and touch one of the keys Selecting FilmsPress the Option key Touch the Projector key Touch the Shading key II Slide Holder/Glass Mount Film Holder/Film Strip Holder Shading Exposure glass UPositiveFilmPO~itiveFilm Under The Lens UnderLens IINegativeFilm UnderLens Negative Film Under The Lens Check the film size, touch one Keys, and touch the Exit key Magenta444 Cyan355 Color Tones In Film ScanningYellow755 Touch the Manual Focus key Image Density AdjustmentCrease key or Decrease key After copying, you can select the next job as follows Selecting Copier FunctionsSelect the modes you want to choose Close the lens cover Exiting Projector ModeTurn off the power switch Proiector Hints 10-22 Holder Slot Blow off any dust using the blower brushExterior Film Holder 11-5 Main Frame CopierOptional Equipments 11-2 256 IJ Specifications are subject to change without noticeGradations Original Type Available Copy Paper Size LT/DLT version Copying Speed Full Color ScansQA4/A3 Version 100% Full Size = Copier + Dual Job Feeder +Sorter + Display Editor + Holder Job Feeder Cl Specifications are subject to change without noticePower Consumption Dual A4 or 81/2 x Sheets Other size Interrupt Bin Capacity 100 SorterTop Bin Capacity A4 or 81/2 x Print Bin Capacity 500 LCD Monochrome, 8 gradations 640 X 480 dots Display EditorMaximum A3cJ, or 11 x 17~ Scanned through the copier Projector Unit