Ricoh NC5006 manual Loading Paper on the Paper Tray

LOADING PAPER ON THE PAPER TRAY

LOADING PAPER ON THE PAPER TRAY

~Before loading paper on the paper tray, refer to the “Use Of Copy Paper” (page 3-2) for non-recommended types of paper.

D Acceptable paper weight: 64 -104.7g/m2 or 17-28 lb.

If the paper is heavier than this, use the by-pass feed tray. (= pages 3-6 and 5-6)

Cl If you use OHP transparencies or adhesive labels, use the by-pass feed tray. (IJ=pages 3-6 and 5-6)

ClYou can than e the paper size and direction of the 1st tray.

I= “Changing Baper Size and D~rect~on” (page 3-8)

~Paper size and direction of the 2nd and 3rd tray are fixed. Load the fixed size paper in the paper tray.

1.Pull the paper tray out until it stops.

2. Load paper in the paper tray.

Cl The paper stack must be flush with the right side of the paper tray.

Cl Make sure to read the notice on the pack- age showing the front side (copy side) of the paper. Load paper with the copy side down.

Cl Do not stack paper over the limit mark.

3-4