Ricoh NC5006 manual Setting Originals On The Exposure Glass

SETTING ORIGINALS Settinq Originals On The Exposure Glass

SETTING ORIGINALS

Setting Originals On The Exposure Glass

If your machine is equipped with the platen cover:

1.Lift the platen cover.

2.Set the original face down on the ex- posure glass. The original must be aligned with the rear left corner.

Cl Before pressing the Start key, lower the platen cover.

If your machine is equipped with the dual job feeder:

1.Lift the dual job feeder.

2.Set the original face down on the ex- posure glass, The original must be aligned to the rear left corner.

Cl Before pressing the Start key, lower the dual job feeder.

4-2