Ricoh NC5006 II Slide Holder/Glass Mount Film Holder/Film Strip Holder, Touch the Shading key

SHADING

Before making copies, you must peflorm shading of the film. This way, the projector can adjust the

to get the projector to register the condition light intensity automatically while copying.

35mmSlides

II (Slide Holder/Glass Mount Film Holder/Film Strip Holder)

Positive

1.Set the film (slide or strip) in the holder. (= page 1O-9)

2.Open the film cover and insert the “P” (Positive) filter (II= page 10-7) in the left slot as shown in the illustration.

IJ Be carefulto insertthe filteras shown, not the other way around.

Cl Before going to the next step, make sure that the fresnel lens is lowered in position.

3. Touch the Shading key.

ically.	12!u!El
Cl The copier will start shading automat-

4.Check if the film is correctly set (I= page 10-9) in the holder. While press- ing the holder lever to the right, insert the holder slightly in the right slot.

5.Adjust the holder by sliding it up and down to position the correct frame for copying.

10-12