Ricoh NC5006 manual Copying, How To Make Copies, @/c =

COPYING How To Make Copies

How To Make Copies

1.Confirm that the touch panel display is on. If not, turn on the main switch.

I

On

,............

,....:.:.”

. .....

PJ

(!) Wrdh

COPYING

II

I

~If the touch panel display is off under the stand by (screen saver) condition (G=page 4-1 3), press the Clear Modes/Stand by key.

~If your machine is in the User Code mode

(= page 8-6), input your user code first and then press #.

2.Select the copy job settings.

0 To make copies with the same colors and size as the originals, see page 4-9. (Standard copy job settings.)

Cl To select advanced functions manually, see chapter 5.

3.Enter the number of copies required

using the Number (O-9)keys.

4.Set the originals on the exposure glass or in the dual job feeder.

(= page 4-2)

5.Press the Start key.

~If you press the Start key during the warm- up period (about 8 minutes, after the main switch is turned on), the Start key in- dicator will blink. Then the copier auto- matically starts copying after the warm-up period (Auto Start mode). The Start key blinks red and green in this mode.

I Input uwr cock, then press @ key.

1

.————— #

I ‘cl I

0

[@/c)] (= 1

[0;023

4-8