Ricoh NC5006 manual Setting Films In The Holder If Needed, Slide Holder/Glass Mount Film Holder

PREPARING FOR COPYING

Setting Films In The Holder (If Needed)

~Check which type of holder you should use.

Slide Holder/Glass Mount Film Holder

D The slide holder is covered with glass. Set the mount films in the slide holder.

CJThe glass mount film holder is not covered with glass. Set the glass mount films (covered by glass) in the glass mount film holder.

IJ Positive film is usually set in a slide mount or glass mount. If you use positive film not set in a mount, set it in the film strip holder (= Film Strip Holder).

1.Open the cover of the slide holder or glass mount film holder, and set the slides in the holder one by one.

~Make the front side of the film face down when setting in the slide holder or glass mount film holder.

0When setting in the slide holder, make sure that all slides must be aligned to the glass of the slide holder cover.

2.Close the holder and lock it as shown in the illustration.

Film Strip Holder

U Negative film usually come in strips.

!3 Follow this procedure for positive strip film as well.

1.Open the film strip holder. Put the front side of the film face down and set

it in the film strip holder.	b up	>-
	Front	w

10-9