Ricoh NC5006 manual Cutting The Film Position Sheet If Needed, 1o-1o

PREPARING FOR COPYING

~When setting film, leave the base film in the film strip holder. This is convenient when performing shading again.

2.Adjust the position of the film.

~Do not touch the image parts of the film when adjusting.

3.Close the film strip holder and lock it

as shown in the illustration.

Cutting The Film Position Sheet (If Needed)

IJ If you do not use the holders and position the film on the exposure glass, a positioning sheet is required.

The positioning sheet should be cut in

the center with the film size, so that you? can place your film in the center. Two

position sheets are included as originals in this machine, so, make a copy from the original sheet, cut the surrounding margin on the dotted lines, and cut away the center part corresponding to the size of the film to be copied.

1o-1o