Ricoh NC5006 manual Hints

HINTS

HINTS

1.If the color balance k improper.

n If the color density leans to red or blue, or isn’t properly balanced, perform the color density adjustment, and the color balance adjustments for Yellow, Magenta, and Cyan (= page 10-18).

2.If the film you want to copy does not match the types of base film included.

DIf you do not plan on copying from this type of film often, use an unex- posed frame of the same film strip, if available, when performing shad- ing.

nIf you plan on copying from this type of film often, make a base slide using an unexposed, developed frame of the film.

nIf you have no blank unexposed frame of the same type of film, you

can use an unexposed frame from film produced by the same com- pany, but the colors might differ a bit.

partMount

3.If the copy image is out of focus

IJ Check if the image on the film is focused or not. If it is, make sure the film is correctly set in the holder.

n If you reset the film correctly in the holder and the image is still out of focus, or if you use a different image, and the copy image is out of focus in every case, please call your service representative.

IJ You can adjust the focus manually with the focusing lever (= page 10-18).

4.If the edge of the original image does not appear on the copy,

~Check the size of the area that can be copied (I= page 10-15).

nWhen setting film in the holder, make sure to position the desired frame properly. a To extend the area that can be copied, use the glass mount film holder and focus

manually.

10-21