Ricoh NC5006 manual Non-recommended Originals, Setting a Stack Of Original ADF/ARDF mode

SETTING ORIGINALS Setting Originals In The Dual Job Feeder

Non-recommended Originals

Caution: The following types of originals are not recommended for use with the dual job

feeder. Please place them directly on the exposure glass. (= page 4-2)

c1 Originals with a paper weigh greater than 128 g/m2 or 34 lb

c1 Originals larger than A3C3, 11“xl7“~

c1 originals thinner than 47 g/m2 or 11 lb

c1 Folded, curled, creased, torn, or damaged originals.

c1 Damp originals

c1 Mailing labels, or perforated originals

n OHP transparencies

Cl Originals smaller than A5 Q (A4/A3 machines), or 51/2’’x8I/2° ~ ~ (LT/DLT machines)

CJ Non-standard sized paper

Cl Pasted originals

c1 Any coated paper (carbon, thermal paper, etc.)

c1 Bound, stapled, or clipped originals

Cl Paper with any kind of coating (such as carbon) on the back, or originals that are taped together.

Setting A Stack Of Original (ADF/ARDF mode)

1.Correct any curl, fold, or crease in the originals before setting. Square the stack of originals.

+

2, Confirm that the Insert Original in-

dicator is lit before setting.

3.Confirm that no previous originals remain on the exposure glass,

4.Adjust the original guide to the original size.

4-4