Ricoh NC5006 manual IINegativeFilm UnderLens Negative Film Under The Lens

IINegativeFilm

UnderLens Negative Film Under The Lens

1.Set the base film in the film strip holder. (E=page 10-8)

2.Open the film cover and while pressing the holder lever to the right, insert the film strip holder slightly in the right slot.

3.Insert the holder until the * mark is

●

placed as shown in the illustration.

4.Insert the “N”(Negative) filter (= page 10-8) in the left slot as shown in the illustration.

Cl Be careful to insert the filter as shown, not the other way around..

5.Cut the positioning sheet to match the film size. (= page 10-10 “Cutting The Film Position Sheet” )

6.Place the positioning sheet under the mirror unit (on the exposure glass).

~Place the marked corner of the film posi- tion sheet at the rear left corner of the exposure glass.

~Before going to the next step, make sure that the fresnel lens is lowered in position.

7.Touch the Shading key.

~The copier will stati shading automat- ically.

10-15