Ricoh NC5006 manual Shading

1.Set the base film and film str.i~ in the holder. (= base film: pagel O-8, film strip: page 1O-9)

2.Open the film cover and while pressing the holder lever to the right, insert the film strip holder slightly to the right slot.

3.Insert the holder until the M mark is placed as shown in the illustration.

4.Insert the “N”(Negative) filter (= page 10-7) in the left slot as shown in the illustration.

IJ Be careful to insert the filter as shown, not the other way around.

IJ Before going to the next step, make sure that the fresnel lens is lowered in position.

5. Touch the Shading key.

I Shading I

~The copier will start shading automat- ically.

6.Adjust the holder by sliding it up and down to position the correct frame for copying.

10-13