Ricoh NC5006 manual Ecl, Colors, Paint mode, Pattern of a previous group

JOB SETTINGS FOR INSIDE THE AREA

~After designating the next group of areas the touch panel display.

If the desired mode settings for Group 2 is just the same as for Group 1, touch the Group 1 key.

(Group 2), the following message will appear on

-------

~1A

lJs~ same mndes as previous group? Select a group or press CEl .

I

If the desired mode settings are not the same as for Group 1, press the No key.

Cl In Color Editing mode, you can select up to three job patterns for at most six groups. After you have set three patterns, the copier will only allow you to choose the

pattern of a previous group.

If you change the settings for one group, it will change the settings for all other groups with the same pattern.

However, if you used a paint setting, changing the color in one group will not affect other areas. (Up to 6 paint colors can be selected.)

Ecl		(Max.	1~II
	No		6 colors
[		I in	Paint mode. )

7-16