Ricoh NC5006 Film Holders /Set 35mm film in one These holders, Use to clean the lens or glass

GUIDE TO COMPONENTS

FILM HOLDERS /Set 35mm film in one

of these holders.

CJ Slide Holder

(This holder is covered with glass.) Set mounted positive films in this holder.

c1 Film Strip Holder

Set negative or positive strip film and base film here.

c1 Glass Mount Film Holder

(This holder is not covered with glass.) Set the positive glass mount films in this holder.

\

LOCK LEVERS

Use to fix the film after setting it in the holder.

I	\		\		\
SLIDE MOUNT				\	BLOWER BRUSH
					Use to clean the lens or glass.
Use to make a	\			FILTERS
base film slide.	BASE FILM		SLIDES	P = Positive
				N = Negative
	Use them	when
				One of them	should
	performing	shading
				be set in the filter slot.
	with Negative		film.

FILM POSITION SHEET

Use a duplicate of this sheet to place the film to the correct position on the exposure glass.

Make a copy from the original sheet, cut the surrounding margin on the dotted lines, and cut away the center part corresponding to the size of the film to be copied.

Keep the original film position sheet.

10-3