Initial Setup Instructions

Chassis Information Screen

"Procedure

To enter or display chassis configuration information:

1.Choose Chassis Info from the Hotwire Chassis Main Menu. The following table describes the information you should enter on the Chassis Information screen.

Field

Input

Description

Chassis Name

16 alphanumeric characters

Name for the equipment

 

 

 

Chassis Contact

32 alphanumeric characters

Name and phone number of

 

 

individual responsible for the

 

 

equipment

 

 

 

Chassis Location

16 alphanumeric characters

Physical location of the

 

 

equipment

 

 

 

Bay Number

16 alphanumeric characters

Floor and/or bay number of the

 

 

equipment

 

 

 

Chassis Number

16 alphanumeric characters

Chassis serial number (located

 

 

on the lower right side of

 

 

chassis)

 

 

 

2.When you have made the appropriate changes to the screen, a message

Configuration has been modified. Save (yes/no)? appears. Enter yes to save changes and press Return to go back to the Hotwire Chassis Main Menu.

What's Next?

Now you are ready to configure your Hotwire DSLAM. Refer to Chapter 4, Configuring the Hotwire DSLAM, for instructions on how to configure the mandatory minimum configurations and Chapter 5, 8310 MVL and 8510 DSL Card Configuration, for additional configuration instructions when customizing your application.

After you have configured your system, you can monitor and troubleshoot potential problems on the system. Refer to Chapter 6, Monitoring the Hotwire DSLAM, and Chapter 7, Diagnostics and Troubleshooting, for more information.

3-4

May 1998

8000-A2-GB26-00

Page 34
Image 34
Paradyne 8310 MVL, 8510 DSL manual Whats Next?, Chassis Information Screen, Field Input Description