DMD15/DMD15L IBS/IDR Satellite Modem | User Interfaces |
|
|
Alarm 2
<1> Drop Status
<1> | Online Flag |
<1> | +5V Voltage |
<1> | +12V Voltage |
<1> | |
<2> | Temperature |
<1> | ESC Source |
<1> | Alarm 3 |
<2> | AUPC Remote Test |
| 2047 BER Mantessa |
<1> | AUPC Remote Test |
| 2047 BER Exponent |
<1> | Reserved |
<4> | Symbol Rate |
<17> | Latched Alarm 2 |
<2> | Reserved |
<1> | Latched Drop Status |
Bit 1 = U IO card present Fault. 1 = Fail, reserved in RCS10/10L mode
Bit 2 = IF card present Fault. 1 = Fail Bits 3 - 7 = Spares
Bit 0 = Frame lock fault. 1 = Fail
Bit 1 = Multiframe lock Fault. Valid in E1 PCM30 and PCM30C. 1 = Fail
Bit 2 = CRC lock fault. Valid in T1ESF, and E1 CRC enabled. 1 = Fail
Bit 3 = T1 yellow alarm received. 1 = Received Bit 4 = E1 FAS alarm received. 1 = Received
Bit 5 = E1 MFAS alarm received. Not valid in FAS mode. 1 = Received
Bit 6 = E1 CRC alarm received. 1 = Received Bit 7 = CRC calculation error. 1 = Fail
0 = Offline, 1 = Online
+5V. Implied decimal point. ex: 49 = +4.9 V
+12V. Implied decimal point. ex: 121 = +12.1 V
Degrees C. Implied decimal point. ex: 490 = 49.0 C (Not Implemented)
0 = Internal, 1 = External
Bit 0 = Backward Alarm 1 Transmitted
Bit 1 = Backward Alarm 2 Transmitted
Bit 2 = Backward Alarm 3 Transmitted
Bit 3 = Backward Alarm 4 Transmitted
Bits 4 - 7 = Spare
0 = No, 1 = Yes
Binary value with implied decimal point; 795 = 7.95)
Binary value with implied sign; 6 =
Ignore
Binary value, 1 sps steps
Bit 0 = Terrestrial clock activity detect. 1 = Fail
Bit 1 = Internal clock activity detect. 1 = Fail
Bit 2 = Tx Sat Clock activity detect. 1 = Fail
Bit 3 = Tx Data activity detect. 1 – Fail
Bit 4 = Tx Data AIS detect. 1 = Fail
Bit 5 = Tx clock fallback. 1 = Fail
Bits 6 & 7 = Spares
Reserved
Bit 0 = Framelock fault. 1 = Fail
Bit 1 = Multiframe lock fault. Valid in E1 PCM30 & PCM30C. 1 = Fail Bit 2 = CRC loclfault. Valid in T1, ESF, and E1 CRC enabled. 1 = Fail
TM051 - Rev. 5.8 |
