Paradyne DMD15L Terminal J12, Remote J13, S6 Ground/Deferred C Switch Positions AGC Out

DMD15/DMD15L IBS/IDR Satellite Modem User Interfaces

Table 5-6. S6 Ground/Deferred – C

Switch Positions

AGC Out

1X

2X

3On

4Off

5X

Prompt - C

1X

2X

3Off

4On

5X

5.13 TERMINAL (J12)

The Terminal Port is an RS-232 Connection that is used to connect a terminal for operating and monitoring the system. It is a 9-Pin Female “D” Connector. Refer to Table 5-7 for pinouts.

Table 5-7. Terminal Port (RS-232) 9-Pin Female “D” Connector (J12)

Pin No.	Signal Name	Signal	Direction
3	Transmit Data	TxD	Output
2	Receive Data	RxD	Input
5	Ground	GND	---
7	Request to Send	RTS	Input
8	Clear to Send	CTS	Input

5.14 REMOTE (J13)

The Remote Port is a RS-485 Connection for remote monitor and control of the modem. It is a 9- Pin Female “D” Connector. Refer to Table 5-8 for pinouts.

Table 5-8. Remote Port RS-485 9-Pin Female “D” Connector (J13)

Pin No.	Signal Name	Signal	Direction
1	Transmit Data B	RS-485 TxD-B	Output
2	Transmit Clock A	TxC-A	Output
3	Transmit Clock B	TxC-B	Output
4	Receive Clock A	RxC-A	Input
5	Signal Common	Common	---
6	Transmit Data A	RS-485 TxD-A	Output
7	Receive Clock B	RxC-B	Input
8	Receive Data B	RS-485 RxD-B	Input
9	Receive Data A	RS-485 RxD-A	Input

TM051 - Rev. 5.8 5-7