Paradyne DMD15L operation manual Latest Software Revision Confirmation

Latest Software Revision Confirmation

When new features are added to Radyne, Inc. equipment, the control parameters are appended to the end of the Non-Volatile Section of the Remote Communications Specification, and status of the features, if any, are added at the end of the Volatile Section. If a remote M&C queries two pieces of Radyne, Inc. equipment with different revision software, they could respond with two different sized packets. The remote M&C MUST make use of the non-volatile count value to index to the start of the Volatile Section. If the remote M&C is not aware of the newly added features to the product, it should disregard the parameters at the end of the Non-Volatile Section and index to the start of the Volatile Section.

Before creating any software based on the information contained in this document, contact the Radyne, Inc. Customer Service Department at (602) 437-9620 to find out if the software revision for that piece of equipment is current and that no new features have been added since the release of this document.