User Interfaces | DMD15/DMD15L IBS/IDR Satellite Modem |
|
|
<1> Alarm 4
<1> Common Alarm 1
<1> | Common Alarm 2 |
<1> | Latched Alarm 1 |
<1> Latched Alarm 2
<1> Latched Alarm 3
<1> Latched Common Alarm 1
Bit 0 = Buffer clock activity detect. 1 = Activity
Bit 1 = External BNC activity detect. 1 = Activity, reserved in RCS10/10L mode
Bit 2 = Rx satellite clock activity detect. 1 = Activity Bit 3 = Insert clock activity detect. 1 = Activity
Bit 4 = External reference PLL activity. 1 = Activity, reserved in RCS10/10L mode
Bit 5 = High Stability reference PLL activity. 1 = Activity, reserved in RCS10/10L mode
Bit 6 = Rx clock fallback. 1 = Fail Bit 7 = Eb/No Threshold, 1 = Fail
Bit 0 =
Bit 1 = +12V alarm. 1 = Fail
Bit 2 = +5V alarm. 1 = Fail
Bit 3 = Reserved
Bit 4 = Battery. 1 = Fail
Bit 5 = RAM and ROM alarm flag. 1 = Fail
Bits 6 and 7 = Spares
Bit 0 = M&C processor fault. 1 = Fail
Bit 1 = U IO card present. 1 = Present, reserved in RCS10/10L mode
Bit 2 = IF card present. 1 = Present Bits 3 - 7 = Spares
Bit 0 = Receive processor fault Alarm. 1 = Fail
Bit 1 = Carrier Loss 1 = Fail
Bit 2 = Multiframe Sync Loss 1 = Fail
Bit 3 = Frame Sync Loss 1 = Fail
Bit 4 = IBS BER Alarm 1 = Fail
Bit 5 = Satellite AIS 1 = Fail
Bit 6 = Rx Data Activity. 1 = Fail
Bit 7 = Rx AGC Level (Not Latched).
Bit 0 = Buffer underflow. 1 = Fail Bit 1 = Buffer overflow. 1 = Fail Bit 2 = Buffer under 10%. 1 = Fail Bit 3 = Buffer over 90%. 1 = Fail
Bit 4 = RS Decoder Lock Fault. 1 = Fail Bit 5 = RS
Bit 6 = RS Decoder Uncorrectable Word. 1 = Fail Bit 7 = Summary Fault. 1 = Fail
Bit 0 = IF synthesizer lock detect Fault. 1 = Fail Bit 1 = Rx Oversample PLL lock detect. 1 = Fail Bit 2 = Buffer clock PLL lock detect. 1 = Fail Bit 3 = Viterbi decoder lock (Not Latched)
Bit 4 = Sequential decoder lock (Not Latched) Bit 5 = Rx 2047 test pattern lock (Not Latched) Bit 6 = External reference PLL lock (Not Latched) Bit 7 = IDR 96 PLL Lock. 1 = Fail
Bit 0 =
Bit 1 = +12V alarm. 1 = Fail
Bit 2 = +5V alarm. 1 = Fail
Bit 3 = Reserved
TM051 – Rev. 5.8 |
