Paradyne DMD15L operation manual Satellite

DMD15/DMD15L IBS/IDR Satellite ModemUser Interfaces

		4 = 2.5 dB/Min, 5 = 3.0 dB/Min, 6 = 3.5 dB/Min, 7 = 4.0 dB/Min,
		8 = 4.5 dB/Min, 9 = 5.0 dB/Min, 10 = 5.5 dB/Min, 11 = 6.0
<1>		dB/min
	AUPC Remote BB	0 = Disable, 1 = Enable
<1>	Loopback
	AUPC Remote 2047	0 = Disable, 1 = Enable
<2>
	AUPC Target Eb/No	Target Eb/No at Receiver
<2>
	AUPC Minimum	Singed value +50 to –200 with implied decimal point; 49 = +4.9
<2>	Power	dBm (two’s compliment)
	AUPC Maximum	Singed value +50 to –200 with implied decimal point; 49 = +4.9
<2>	Power	dBm (two’s compliment)
	AUPC Nominal Power	Singed value +50 to –200 with implied decimal point; 49 = +4.9
<1>		dBm (two’s compliment)
	Time Mark Transfer	0 = Disable, 1 = Enable
<1>	Enable
	Time Mark Transfer	Unsigned Binary (4 to 16) Inclusively
	Pattern Length
<1>	Reserved	Reserved
<1>	Reserved	Reserved
<1>	TPC Interleaver	0 = Disable, 1 = Enable
Opcode: <2602h> Command a modulator's frequency
<4>	Frequency	Selects the IF Frequency in Hz. The range is 50 MHz to 180
		MHz for the 70/140 MHz type modems and 950 MHz to 1750
		MHz for the L-Band modems.
		Note: This command also turns the carrier off to protect
		the satellite.
Opcode: <2603h> Command a modulator's strap code
<2>	Strap Code	Binary value
		Note: This command also turns the carrier off to protect the
		satellite.
Opcode: <2604h> Command a modulator's data rate
<4>	Data Rate	Binary value, 1 bps steps
		Note: This command also turns the carrier off to protect the
		satellite.
Opcode: <2605h> Command a modulator's filter mask
<1>	Filter Mask	0 = INTELSAT, 1 = EUTELSAT, 2 = CLOSED NET1

TM051 - Rev. 5.8 4-73