Paradyne DMD15L operation manual Back Panel Options, Customized Options

DMD15/DMD15L IBS/IDR Satellite Modem Introduction

The DMD15/DMD15L can be equipped with an optional OM73 scrambler at the customer’s request. This option must be prepped at the factory. Once installed, selection of the OM73 Scrambler/Descrambler will automatically invert the baseband data on the Modulator/Demodulator respectively. This configuration is required to run compatible with the OM73 Modem.

1.1.13 Back Panel Options

The DMD15/DMD15L has several optional Interface Modules available (refer to Figures 5-1 through 5-5). These include:

Universal Interface Module w/ ESC

G.703 Interface Module w/ESC

G.703 Interface Module

Universal Interface Module

Synchronous Interface Module

These Interface Modules are available with AC or DC Power Input Modules and the following Transmit and Receive schemes.

IF Transmit and Receive

L-Band Transmit and Receive

IF Transmit, L-Band Receive

IF Receive Only

L-Band Receive Only

1.1.14 Customized Options

The DMD15/DMD15L may be customized for specific customer requirements. Most modifications or customization can be accomplished by means of firmware/software modifications.

The following are examples of the types of customization available to the user:

Customized Data Rates.

Customized Scrambler/Descramblers. Customized Overhead Framing Structures. Customized Modulation Formats.

Customized Uses for the Earth Station-to-Earth Station (ES-ES) Overhead Channel.

Contact the Radyne , Inc. Customer Service or Sales Department at (602) 437-9620 for all requests.

TM051 - Rev. 5.8 1-3