Paradyne operation manual 5.2 DMD15/DMD15L Demodulator, Query Response

DMD15/DMD15L IBS/IDR Satellite ModemUser Interfaces

	Power	dBm (two’s compliment)
<2>	AUPC Maximum	Singed value +50 to –200 with implied decimal point; 49 = +4.9
	Power	dBm (two’s compliment)
<2>	AUPC Nominal Power	Singed value +50 to –200 with implied decimal point; 49 = +4.9
		dBm (two’s compliment)
Opcode: <2635h> Command AUPC Remote Configuration
<1>	AUPC Remote Enable	0	= Off, 1 = On
<1>	AUPC Remote BB	0	= Disable, 1 = Enable
	Loopback
<1>	AUPC Remote 2047	0	= Disable, 1 = Enable
Opcode: <2636h> Command Modulator Reed Solomon N & K Codes and Interleaver Depth
<1>	Tx RS N Code	2	- 255. Reed-Solomon code word length
<1>	Tx RS K Code	1	- 254. Reed-Solomon message length
<1>	Tx RS Depth	4 or 8 Reed-Solomon Interleaver Depth
Opcode: <2638h> Command a modulator’s Time Mark Transfer
<1>	Time Mark Transfer	0	= Disable, 1 = Enable
	Enable
<1>	Time Mark Transfer	Unsigned Binary (4 to 16) Inclusively
	Pattern Length

4.9.5.2 DMD15/DMD15L Demodulator

Opcode: <2401h> Query a demodulator's configuration and status

		Query Response
<1>	Number of nonvol
	bytes
		Configuration Bytes
<1>	Mode	0 = Closed Net. 1 = IDR, 2 = IBS, 3 = D&I
<4>	Frequency	Selects the IF frequency in Hz. The range is 50 MHz to 180
		MHz for the 70/140 MHz type modems and 950 MHz to 1750
		MHz for the L-Band Modems.
<2>	Sweep Delay	Unsigned binary value, decimal point implied, 0.1 second steps
		0.0 – 900.0
<4>	Data Rate	Binary value, 1 bps steps
<1>	Sweep Boundary	Sweep limits. Max of ± 32 kHz in kHz steps 1 - 32
<1>	Input Level Limit	Lower level limit, binary value, 1 dB steps. Reserved
<2>	Strap Code	Binary value
<1>	Filter Mask	0 = INTELSAT, 1 = EUTELSAT, 2 = CLOSED NET1

TM051 - Rev. 5.8 4-77