Paradyne DMD15L Tx D&I menu Drop Mode Enable, Disable, SATCh TS, Time Mark Enable, Disable

User InterfacesDMD15/DMD15L IBS/IDR Satellite Modem

Tx D&I (menu):
Drop Mode:	{Enable, Disable}
	Allows the user to enable or disable the following:
	T1-D4, T1-ESF, PCM-30, PCM-30C, PCM-31,
	PCM-31C, SLC-96, T1-D4-S, T1-ESF-S.

Map Copy:	{Rx Edit, Tx Edit, Rx Acti, Tx Acti, ROM 1…ROM 8,
	User 1…User 8}
	Allows user to copy Drop and Insert maps. If the user
	attempts an invalid copy, the error prompt “BAD
	DESTINATION” will be displayed and the copy will not be
	allowed. The Tx Active map is the drop map currently
	being used by the modem. For a more detailed
	description of this function, see Section 4.6.4.
SATCh TS:	Allows the user to edit the Tx Edit Map to specify the
	terrestrial slots that will be dropped into which satellite
	channels. The Satellite Channels are fixed and the
	number of channels are determined by the data rate.
	The Terrestrial Timeslots available are determined by the
	Drop Mode. When the user has finished editing the Tx
	Edit map, it must be copied to the Tx Active map before
	it can be used by the modem.

Time Mark:	{Enable, Disable}
	Allows the user to enable or disable the “Time Mark
	Transfer” (TMT) Transmit Request External Input to
	initialize the state machine that detects the proper states
	of I and Q and inserts the TMT Pattern into the transmit
	symbol stream. This feature is only available in BPSK,
	QPSK, and OQPSK Modulations and requires specific
	hardware and configuration at the factory.

TMT Length:	{4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16}
	Allows the user to set the length of the pattern marker.
	This feature is only available in BPSK, QPSK, and
	OQPSK Modulations and requires specific hardware and
	configuration at the factory.
Rx Setup (menu):
Rx Ckt ID:	Provides entry of Rx Circuit Identifier. Circuits can be
	given up to an 11 Character alphanumeric Identity such
	as DLINK1
Rx Type:	{G.703 (Balanced/Unbalanced), V.35, RS-232, RS-
	422}
	Allows the user to select the Receive Type.
Buff Size:	{0-32 msecs}
	Allows the user to set the Doppler Buffer Size in msec.
Buff Clk:	{SCTE (External), SCT (Internal), Rx Sat, EXTCLK}

4-12 TM051 – Rev. 5.8