User Interfaces | DMD15/DMD15L IBS/IDR Satellite Modem |
|
|
<1>
<1>
<1>
<1>
<1>
<1>
<1>
<1>
<1>
<1>
<1>
<1>
<30>
<1>
<1>
<1>
<1>
<1>
Demodulation Type
Convolutional
Decoder
Reed Solomon Differential Decoder
Descrambler Control Descrambler Type
Spectrum
Buffer Size Msec
Buffer Clock
Buffer Clock Polarity
Insert Mode
T1E1 Frame Source
Insert Map
Framing
Operating Mode
Map Summary To Backward Alarm
Forced Alarms
Alarm 1 Mask
0 = QPSK, 1 = BPSK, 2 = 8PSK, 3 = 16QAM, 4 = OQPSK
0 = None, 1 = Viterbi 1/2 Rate, 2 = Viterbi 2/3 Rate, 3 = Viterbi 3/4 Rate, 4 = Viterbi 5/6 Rate, 5 = Viterbi 7/8 Rate, 6 = Viterbi 8/9 Rate, 7 = Sequential 1/2 Rate, 8 = Sequential 2/3 Rate, 9 = Sequential 3/4 Rate, 10 = Sequential 5/6 Rate, 11 = Sequential 7/8 Rate, 12 = Sequential 8/9 Rate, 13 = Trellis 1/2 Rate, 14 = Trellis 2/3 Rate, 15 = Trellis 3/4 Rate, 16 = Trellis 5/6 Rate, 17
=Trellis 7/8 Rate, 18 = Trellis 8/9 Rate, 19 = SEQ 3/4 Rate, 20 = TPC .793 2D, 21 = TPC .495 3D, 22 = TPC .325 3D
0 = Disable, 1 = Enable
0 = Off, 1 = On, 2 = EF Mode*
*Available in uncoded QPSK modulation for compatibility.
0 = Disable, 1 = Enable
0 = None, 1 = IBS Scrm., 2 = V35_IESS, 3 = V35_CCITT, 4 = V35_EFDATA, 5 = V35_FAIRCHILD, 6 = OM73, 7 = RS Descrambler, 8 = V.35 EF RS Descrambler, 9 = TPC Scrambler
0 = Normal, 1 = Inverted
Indicates buffer size in msecs. 0 through 32
0 = SCTE, 1 = SCT, 2 = EXT EXC, 3 = RX SAT
0 = Normal, 1 = Inverted
0 = Disabled, 1 =
T1 ESF S
0 = Internal, 1 = External
Timeslots to insert organized by satellite channel
0 = No framing, 1 = 96K, 2 = 1/15, 3 = EF AUPC 1/15
0 = Stop, 1 = 2047 test
0 = None, 1 = BK1, 2 = BK2, 3 = BK1 & 2, 4 = BK3, 5 = BK1 & 3, 6 = BK2 & 3, 7 = BK1, 2 & 3, 8 = BK4, 9 = BK1 & 4, 10 = BK2 & 4, 11 = BK1, 2 & 4, 12 = BK3 & 4, 13 = BK1, 3 & 4, 14 = BK2, 3 & 4, 15 = BK1, 2, 3 & 4
0 = None, 1 = Send the Alarm
Bits 0 – 7 = Spares
Bit 0 = Rx proc
Bit 1 = Carrier Loss
Bit 2 = Multiframe Sync Loss
Bit 3 = Frame Sync Loss
Bit 4 = IBS BER Alarm
TM051 – Rev. 5.8 |
