Paradyne DMD15L TX Edit TX Active, RX Edit RX Active, TX Active TX Edit, RX Active RX Edit

DMD15/DMD15L IBS/IDR Satellite Modem Operation

For the Transmit Side:

1.Push <ENTER> to get the flashing cursor.

2.Use the Up Arrow Key to make the left portion of the display read “TX EDIT”.

3.Use the Right or Left Arrow Keys to switch the flashing cursor to the right portion of the display.

4.Use the Up or Down Arrow Key to make the right hand portion read “TX ACTIVE”.

5.The mapping display should now look like this:

Map Copy

TX EDIT > TX ACTIVE

6.Push <ENTER> to enter this command. This tells the modem to configure to the settings that were assigned in the Channel/Timeslot display.

For the Receive Side:

1.With Rx Side Channels configured as follows: CH1 to TS1, CH2 to TS2, CH3 to TS3 and CH4 to TS4.

2.After the timeslots are assigned properly, scroll to the Mapping Menu and use the above procedure to enter the settings into the modem.

3.Set the display to read:

Map Copy

RX EDIT > RX ACTIVE

4.Press <ENTER> to enter the settings into the modem.

To View the current Timeslot Assignment:

1.If there is a question of the channels not being entered properly, the Mapping Menu may be used to see how the channels/timeslots are configured in the modem.

2.Use <ENTER> and the Arrow Keys to make the mapping menu read (for the Tx Side):

Map Copy

TX ACTIVE > TX EDIT

3.Press <ENTER>. The modem has now copied the current Tx Settings to the Tx Channel/Timeslot Display.

4.For the Rx Side:

Map Copy

RX ACTIVE > RX EDIT

TM051 - Rev. 5.8 3-19