Paradyne DMD15L operation manual Unsigned Binary Value, 0-99, Implied Decimal Point

DMD15/DMD15L IBS/IDR Satellite ModemUser Interfaces

	ES Baud	0 = 7 Bits. 1 = 8 Bits
<1>
	ES Data Bits	0 = 32K Voice. 1 = 64K Data
<1>
	IDR Overhead Type	0 = Disable, 1 = Enable, 2 = FM Only
<1>
	FM Orderwire Mode	Unsigned Binary (4 to 16) Inclusively
<1>
	Time Mark Transfer	Unsigned Binary Value, 0-99, Implied Decimal Point
<1>	Pattern Length	0.0 - 9.9 dB
	Eb/No Threshold	Unsigned binary value Sweep limits. Max of +/-32000 Hz in 1
<2>	Reacquisition Sweep	Hz steps 0 – 32000
	Boundary
<3>	Reserved	Reserved
<1>	TPC Deintereleaver	0=Disable, 1=Enable
		Status Bytes
<1>	Control Mode	0 = Front Panel. 1 = Terminal, 2 = Computer
<1>	Revision Number	Decimal point implied

<1>	Alarm 1	Bit 0 = Receive processor fault. 1 = Fail
		Bit 1 = Carrier Loss. 0 = pass. 1 = Fail
		Bit 2 = Multiframe Sync Loss 0 = pass. 1 = Fail
		Bit 3 = Frame Sync Loss 0 = pass. 1 = Fail
		Bit 4 = IBS BER Alarm 0 = pass. 1 = Fail
		Bit 5 = Satellite AIS 0 = pass. 1 = Fail
		Bit 6 = Rx Data Activity. 1 = Activity
		Bit 7 = RX AGC Level. 0 = Pass, 1 = Fail
<1>	Alarm 2	Bit 0 = Buffer underflow. 0 = OK. 1 = Underflow
		Bit 1 = Buffer overflow. 0 = OK. 1 = Overflow
		Bit 2 = Buffer under 10%. 1 = Under 10%
		Bit 3 = Buffer over 90%. 1 = Over 90%
		Bit 4 = RS Decoder Lock Fault. 1 = Fail
		Bit 5 = RS De-Interleaver Fault. 1 = Fail
		Bit 6 = RS Decoder Uncorrectable Word. 1 = Fail
		Bit 7 = Summary Fault. 1 = Fail
<1>	Alarm 3	Bit 0 = IF synthesizer lock detect. 1 = Lock
		Bit 1 = Rx Oversample PLL lock detect. 1 = Lock
		Bit 2 = Buffer clock PLL lock detect. 1 = Lock
		Bit 3 = Viterbi decoder lock. 1 = Lock
		Bit 4 = Sequential decoder lock. 1 = Lock
		Bit 5 = Rx 2047 test pattern lock. 1 = Lock
		Bit 6 = External reference PLL lock. 1 = Lock
		Bit 7 = IDR 96K PLL Lock. 1 = Lock

TM051 - Rev. 5.8 4-81