Paradyne Routers manual Manually Logging Out, Automatically Logging Out, Then, Procedure

Accessing the DSL Router

Manually Logging Out

To log out, there are two commands: logout and exit.

"Procedure

To log out of the Hotwire DSL Router command line session or Telnet session:

1.At the > prompt, type logout and press Enter.

2.The system ends the session immediately. Any configuration updates must be saved before exiting or the updates will be lost.

"Procedure

To exit the Hotwire DSL Router's current access level:

1.At the > prompt, type exit and press Enter. If there are any unsaved configuration changes, you will be prompted to save changes before exiting.

2.The exit command has the following effect:

If you are accessing the DSL router . . .	Then . . .
At the Local console and logged in at the	You are placed at the Operator level
Administrator level, configuration mode	and any configuration updates must be
	saved or the updates will be lost.
At the Local console and logged in at the	You are placed at the Operator level.
Administrator level, non-configuration
mode
At the Local console and logged in at the	The Exit command responds exactly
Operator level	like the Logout command.
Via a Telnet session and logged in at any	Entering either of the following ends
access level	the Telnet session immediately:
	H Exit
	H Ctrl + ] (right bracket)

Automatically Logging Out

The DSL router has an automatic timeout feature that logs you out of the system after five minutes of inactivity. Any input that is not saved is lost. You will need to log back in.

At the console, press Enter to display the login> prompt to log back in. The autologout {enable disable} command default is enabled. Unsaved configuration input is lost.

When autologout is:

HEnabled, the current configuration is retained through a power recycle.

HDisabled, the system inactivity timer is disabled.

2-6 August 2000 6371-A2-GB20-10