System information 23
SmartLink M-ATA Getting Started Guide 3 • Home
System information
\
Figure 3. SmartLink VoIP download and configuration Home page
System Uptime
Shows how long the SmartLink M-ATA has been operating since the last time it was reloaded (either by pow-
ering the unit off and then on again, or by selecting System > Reload).
LAN IP Address
The IP address of the SmartLink M-ATA. If (Static) is shown next to the address, it means the IP address was
assigned to the SmartLink M-ATA under the LAN Settings. (Dynamic) indicates the IP address was learned
via DHCP.
MAC address
The media access control (MAC) address of the Ethernet interface in the SmartLink.
Application Version
The SmartLink firmware version number.
Config Date
The date of the configuration file that was downloaded from an auto-upgrade server.