Supplementary Service Keys, Warm Line | Patton electronic M-ATA

SmartLink M-ATA Getting Started Guide	6 • System

Supplementary Service Keys

Supplementary Service Keys are key sequences that can enable and disable certain calling features from an analog phone handset attached to the SmartLink M-ATA.

Note The supplementary service keys must begin with a ‘*’,’#’ character, or f (ﬂash hook) and follow a 1 or 2 numeric digit(s).

Figure 34. Supplementary Service Keys section of Localization Window

Call forward All

Enables or disables the unconditional call forwarding feature.

Call forward on Busy

Enables or disables the call forwarding on busy feature.

Call forward selective

Enables or disables the call forwarding on busy feature.

Call Waiting

Enables or disables the call waiting feature.

Incoming Call Block

Enables or disables the blocking of incoming calls based on the phone number of the caller feature.

Block Anonymous Calls

Enables or disables the blocking of incoming calls that are using the anonymous caller ID feature.

Distinctive Ring

Enables or disables the distinctive ring tones based on the phone number of the calling party feature.

Warm Line

Enables or disables the warm line calling feature.

Localization

58

Image 58

Patton electronic M-ATA manual Supplementary Service Keys, Call forward selective, Block Anonymous Calls, Warm Line

Contents

SmartLink M-ATA Mailsupport@patton.com Summary Table of Contents Table of Contents Telephony None Table of Contents System Table of Contents Documentation Calling Features List of Figures List of Tables Audience About this guideStructure Precautions Safety when working with electricity General observations Typographical conventions used in this documentGeneral conventions Chapter contents General information SmartLink M-ATA overview SmartLink M-ATA SmartLink installation Installing the M-ATA Phone Power adapter Resetting the M-ATA to factory default Home System information System Uptime System information System Status Network-LAN Status Network SettingsInterface Status Settings Obtain LAN conﬁguration dynamically Internet ConﬁgurationSpecify ﬁxed LAN conﬁguration Settings Enable PPPoEAuthentication WAN PPPoE Conﬁguration WAN MAC Address Spoofed Conﬁguring Dynamic DNSMAC Spooﬁng Conﬁguration Vlan Conﬁguration Priority Tag Ieee 802.1q ToS/DiffServVlan Tag Ieee 802.1q Saving your work Telephony Telephony Telephony VoIP Server Registration Status VoIP StatusPhone Line Status Subscribed for Voicemail Caller ID SettingUser Name Messages waiting Gateway Settings SIP Server SettingsSIP Conﬁguration RTP Telephone Event Conﬁguration SIP ExtensionsVoIP Vlan Conﬁguration Hook Flash Mime Type SIP Timer Values millisecondsSIP Parameters RTP Parameters NAT Traversal Jitter Buffer Audio/CODEC ConﬁgurationPacketization FAX without T.38 Use G.711 fax Phone User Information Supplementary Service Activation Call Transfer Message Waiting IndicatorDistinctive Ring Dialing by IP Address Call Forward Settings Dial Out Type Incoming Call Block Selective Call Forward SettingsOutgoing Call Block Speed Dial Http Digest SettingLine 1 Speed Dial Settings Speed Dial Serv System System System New User Password Set Security PasswordNew Root Password Conﬁrm new password Conﬁguration Syslog ServiceEnable Syslog Syslog Server NTP Service Debug ServiceEnable Debug Debug Server Enable Http Service AccessTime Zone Adjust clock for daylight savings Enable Ping Reply Localization Call Progress Tones Conﬁrm Tone Dial TonePrompt Tone Holding Tone Distinctive Ring Settings Following is a sample ring cadence pattern conﬁguration Block Anonymous Calls Supplementary Service KeysCall forward selective Warm Line Income Caller ID IP DialingSpeed Dialing Calling Preﬁx Keys Call Conference Call HoldCall Waiting call alternative Call Conference Drop Control Timer Values FXS Port Ring Setting FXS Port Polarity Conﬁguration Snmp Community Conﬁguration Snmp ConﬁgurationSnmp Trap Conﬁguration Snmp System Conﬁguration Auto Upgrade Manual Upgrade Manual Upgrade window Reload Documentation Introduction Documentation link Logout Logout window Contacting Patton for assistance Contact information Patton support headquarters in the USA Warranty coverage RMA numbers Appendix a Compliance information Radio and TV Interference FCC Part Safety ComplianceCompliance CE Notice Declarations of Conformity Appendix B Speciﬁcations Connectivity Voice Processing signalling dependentVoice Connectivity Fax and Modem Support Management Voice Services/FeaturesIP Services Operating Environment Appendix C Dial plans Non-dialed Line Dial Plan Sample Dial PlansSimple Dial Plan Complex Dial Plan Sample Dial Plans Appendix D Calling Features Distinctive on Distinctive OFF Appendix E Voice prompt conﬁguration Accessing the voice prompt Existing voice prompt conﬁguration