Patton electronic M-ATA features to work.

Introduction 84
SmartLink M-ATA Getting Started Guide D • Calling Features
Introduction
The SmartLink M-ATA family supports advanced calling features that can be turned on and off from phones
attached to the SmartLink M-ATA (see table 3).
Note Your telephony service provider must enable your service for these calling
features to work.
Note F in table 3 refers to the hook flash event.
Table 3. Calling features
Feature Keypad Feature Keypad
Call Hold F1 Call Retrieve F*
Conference F7 Conference Drop F8
Call Transfer F4
Do not Disturb ON *82 Do not Disturb OFF #82
Distinctive ON *90 Distinctive OFF #90
Call Waiting ON *91 Call Waiting OFF #91
Incoming Caller ID Display ON *92 Incoming Caller ID Display OFF #92
Self Caller ID Block Service ON *93 Self Caller ID Block Service OFF #93
Anonymous Call Reject ON *94 Anonymous Call Reject OFF #94
Incoming Call Block ON *95 Incoming Call Block OFF #95
Call Forward Selective ON *96 Call Forward Selective OFF #96
Call Forward All ON *97 Call Forward All OFF #97
Call Forward Busy ON *98 Call Forward Busy OFF #98
Warm Line ON *99 Warm Line OFF #99
IP Dialing ON *80 IP Dialing OFF #80
Speed Dialing ON *81 Speed Dialing OFF #81
Call Return *60
Config Warm Line Number
(*70 yyyyy where yyyyy = number to call) *70
Config Speed Dialing Number
(*71 xyyyyy where x = speed dial key
and yyyyy = number to call)
*71
Config IP Dialing
(*72 xxx*xxx*xxx*xxx*yyyy where xxx = IP
address and yyyy = optional port number)
*72
Set Call Forward Number
(Wait for 3 short confirmation tones
before hanging up)
*73
Access Voicemail *86