Pelco TLR2096 operation manual Main Menu, Display Menu 6.4.1 Display Mode, Time Date Size

<MAIN MENU >

DISPLAY

TIME DATE SEARCH TIMER PROGRAM RECORDING SET UP REAR TERMINAL MAINTENANCE

)FIRST TIME SET UP

Use JOG to select, and ENTER.

Press DISPLAY to exit.

Figure 8. Main Menu

<DISPLAY>
)DISPLAY MODE	1
TIME DATE SIZE	SMALL

Ex.<MODE 1>

01 - 01 - 97 00:00:00

Figure 9. Display Menu

6.3MAIN MENU

•DISPLAY

Sets the display format of the time and date on the monitor.

•TIME DATE SEARCH

Sets the time/date and direction to search for a desired location on a tape.

•TIMER PROGRAM

Sets the timed recordings.

•RECORDING SET UP

Sets the alarm recording mode, alarm recording duration, and emergency recording.

•REAR TERMINAL

Sets the number of frames or fields to record for CLK OUT, output signal of the CALL OUT terminal, and the MODE OUT terminal, etc.

•MAINTENANCE

Displays the power loss list and alarm list, etc. Initializes all menu settings. Clears the power loss list and alarm list.

•FIRST TIME SET UP

Sets the quasi v-sync, time/date, and VCR operation when the end of the tape is reached.

6.4DISPLAY MENU 6.4.1 Display Mode

This is where you set the display mode. (Set the current date and time in the First Time Set Up menu. Refer to Sections 6.10.1 and 6.10.2.)

DISPLAY MODE 1 Displays date and time.

DISPLAY MODE 2 Displays date, day of the week, present time, and recording mode.

DISPLAY MODE 3 Displays nothing until an alarm recording starts—then date, alarm recording number, etc. is displayed.

DISPLAY MODE 4 Displays nothing. Even in the case of alarm recording nothing is displayed on the monitor.

During an alarm recording, the alarm recording number is displayed if the display mode is set from 1 to 3.

6.4.2 Time Date Size

This is where you set the size of the letters in the day and time display.

SMALL	The letters become small.
LARGE	The letters become large.

Pelco Manual C651M (7/99) 21