<TIME DATE ADJUST > |
|
|
DAYLIGHT SAVINGS | OFF | |
MONTH |
| 01 |
DATE |
| 01 |
YEAR |
| 97 |
TIME | 00:00:00 | |
|
|
|
|
|
|
<TIME DATE ADJUST > |
|
|
DAYLIGHT SAVINGS | OFF | |
MONTH |
| 01 |
DATE |
| 01 |
YEAR |
| 97 |
TIME | 00:00:00 | |
|
|
|
|
|
|
<TIME DATE ADJUST > |
|
|
DAYLIGHT SAVINGS | OFF | |
MONTH |
| 01 |
DATE |
| 01 |
YEAR |
| 97 |
TIME | 00:00:00 | |
|
|
|
|
|
|
<TIME DATE ADJUST > |
|
|
DAYLIGHT SAVINGS | OFF | |
MONTH |
| 08 |
DATE |
| 01 |
YEAR |
| 97 |
TIME | 00:00:00 | |
|
|
|
|
|
|
<TIME DATE ADJUST > |
|
|
DAYLIGHT SAVINGS | OFF | |
MONTH |
| 08 |
DATE |
| 01 |
YEAR |
| 97 |
TIME | 00:00:00 | |
|
|
|
|
|
|
<TIME DATE ADJUST > |
|
|
DAYLIGHT SAVINGS | OFF | |
MONTH |
| 08 |
DATE |
| 05 |
YEAR |
| 97 |
TIME | 00:00:00 | |
|
|
|
|
|
|
<TIME DATE ADJUST > |
|
|
DAYLIGHT SAVINGS | OFF | |
MONTH |
| 08 |
DATE |
| 05 |
YEAR |
| 97 |
TIME | 00:00:00 | |
|
|
|
|
|
|
<TIME DATE ADJUST > |
|
|
DAYLIGHT SAVINGS | OFF | |
MONTH |
| 08 |
DATE |
| 05 |
YEAR |
| 99 |
TIME | 00:00:00 | |
|
|
|
6.Do the following to advance the clock by one hour and set Daylight Savings to ON:
Turn the SHUTTLE ring to the right. The DAYLIGHT SAVINGS display will flash. Turn the JOG dial to select ON.
•The clock advances by one hour and the Daylight Sav-
ings Time symbol ( 
) will be displayed next to the present time display.
•To cancel Daylight Savings Time, switch DAYLIGHT SAV- INGS to OFF.
NOTE: If power goes out while Daylight Savings Time is se- lected, the power failure mark “X” will replace the Day- light Savings Time symbol. When the power failure mark “X” disappears, the Daylight Savings Time sym- bol (
) will reappear.
7.To set the month, turn the SHUTTLE ring to the right. The month display will flash. Turn the JOG dial to the right to set the MONTH.
8.To set the date, turn the SHUTTLE ring to the right. The date display will flash. Turn the JOG dial to the right to set the DATE.
9.To set the year, turn the SHUTTLE ring to the right. The year display will flash. Turn the JOG dial to the right to set the YEAR. The year digits can be set from 97 (for year 1997) to 27 (for 2027).
10.To set the time, turn the SHUTTLE ring to the right. The hour digits of the time display will flash. Turn the JOG dial to the right to set the hour digits. Set the minute digits in a similar fashion.
To set the time to the exact second, do the following. When you set the minute digits, the digit on the right will flash and the seconds digits stay at 00. Turn the SHUTTLE ring to the right when the time signal reaches 00 seconds of the time you set. The time will begin counting from 00.
11.Turn the SHUTTLE ring to the right if you did not already do so in step 10. Programming is now complete.
12.Press the DISPLAY button. The time display will appear.
NOTE: The POWER button will not operate if any menu display is flashing.
28 | Pelco Manual C651M (7/99) |
