Pelco TLR2096 operation manual Mechanical, Gnd, General

MECHANICAL
Heads
Video:	4 rotary single crystal heads
Audio/Control:	1 stationary head
Erase:	1 full-track head
Motors:	3 motors-drum/capstan direct drive system
Video Input:	1.0 Vp-p, 75 ohms, BNC plug
Audio Input:	-8 dBs, 50k ohms, RCA plug
Microphone Input:	-67 dBs, 600 ohms, mini mic jack
Video Output:	1.0 Vp-p, 75 ohms, BNC plug
Audio Output:	-6 dBs, 1k ohms, RCA plug
Connectors:
SET Input:	Screw terminal for starting alarm recording
RST Input:	Screw terminal for finishing alarm recording or for
	adjusting on-screen clock
REC Input:	Screw terminal for starting/finishing recording or for
	series recording
GND:	Screw terminal for ground
ALM Output:	Screw terminal for output while alarm recording is
	under way
CLK Output:	Screw terminal to command camera switching
MODE Output:	Screw terminal for indication of VCR selected mode
CALL Output:	Screw terminal for external warning device or for
	series recording
REMOTE Jack	Jack for connecting the remote control unit
GENERAL
Operating Temperature:	41°F-104°F (5°C to 40°C)
Relative Humidity:	Maximum 80%
Dimensions:	3.7”H x 16.7”W x 12.4”D (JOG dial included)
	(9.3 x 42.5 x 31.5 cm)
Weight:	10 lb (4.5 kg)

(Design and specifications are subject to change without notice.)

Pelco Manual C651M (7/99) 51