Pelco TLR2096 Installation, PRE-INSTALLATION Cautions, Securing The VCR Controls, Monitor Tips

4.0 INSTALLATION

4.1PRE-INSTALLATION CAUTIONS

1.Provide secure power to system components. Prevent overloading or shorting by dedicating power circuits to the surveillance equipment. Restrict access to the surveillance system circuit breakers, switches, and equipment power cords.

2.Surveillance system components must be operationally compatible. Time-lapse recording speeds and dwell times of any accessory switching equipment must be compatible with each other.

3.The TLR2096 time-lapse VCR provides multiple alarm recording speeds so it is important that alarm triggering of components be operationally compatible. Refer to Section 2.1 for information on time-lapse recording.

4.Complete all system hookups (camera, multiplexer, etc.) before installing the VCR in a location where you cannot access its rear panel.

4.1.1 Securing The VCR Controls

Protect surveillance equipment to forestall tampering. We recommend putting the recorder in a secure VCR cabinet. Pelco offers such units—the RM2000, which is a rack kit for a single VCR, and the RM2004, which is a rack kit for four VCRs.

4.1.2Monitor Tips

•Pelco recommends using a CCTV monitor.

•Some monitors may cause picture vibration or picture distortion at the top or bottom of the image during still or normal playback. (Refer to Section 9.4.3 for information.)

A television may be unable to provide a stable picture without vibration or distor- tion.

4.2INSTALLATION

1.Remove the VCR and all cables from the box.

2.Place the VCR in a suitable location.

•If the location is unsecured, refer to Section 4.1.1 for information about products to lock up the VCR.

•Do all system hookups (camera, multiplexer, etc.) before installing the VCR in a location where you cannot access its rear panel.

3.If installing in a rack, place the VCR in the rack before making cable and power connections. Refer to the documentation included with the rack kit for specific installation instructions.

12 Pelco Manual C651M (7/99)