25
Finalise set up of the external receiver
1Tune your external receiver to the TV channel which transmits the
GUIDE Plus+®data.
OIf this TV channel is available on the internal tuner of the
DVD-recorder, select the TV channel on the DVD-recorder
using CHANNEL qP,CHANNEL rS.
2If you did not find your country in this list, no TV channel will
provide the GUIDE Plus+®system information.
Refer to the internet page http://www.europe.guideplus.com to
find further information and tips.
Country/City
(Language) TVchannel (aerial) TVchannel (SAT)
Deutschland Eurosport Eurosport
Astra 19.2E
Österreich Eurosport
Eurosport
Astra 19.2E, Hotbird
13.0E
Schweiz (Deutsch) Eurosport Eurosport
Astra 19.2E
United Kingdom ITV Eurosport
Astra 28.2E
France Canal+
España Tele5
Nederland Music Factory (TMF) /
Eurosport
TMF Astra 19.2E
Eurosp. Hotbird 13.0E
- Eindhoven Music Factory (TMF) Music Factory (TMF)
Astra 19.2E
- Rotterdam Music Factory (TMF) MusicFactory (TMF)
Astra 19.2E
- Amsterdam Music Factory (TMF) Music Factory (TMF)
Astra 19.2E
België (Flemish) MusicFactory (TMF) Music Factory (TMF)
Astra 19.2E
3If the TV channel is only available on the external receiver, select
the programme number of the socket to which the external
receiver is connected.
OIf the external receiver is only connected to the aerial socket,
you must select the programme number on the DVD
recorder under which the external receiver is stored.
4If you can switch between 'TV' and 'Radio' on the external
receiver, select 'TV'.
5Leave the DVD-recorder and the satellite receiverswitched on for
about 24 hours to load the GUIDE Plus+®data.
6If GUIDE Plus+®data were loaded, switch the DVD-Recorder off
with the STANDBY m2button for approx.10 minutes. During
this time, the data will be stored in a memory to prevent them
from being erased in case of malfunction (power failure).
7Press GUIDE/TV Jand select the menubar using AI.
8Select the 'Editor' screen using CMand confirm using BO.
Home
Editordisplays your TV channel settings. You may
switchchannel On or Off (grey), select their Source
andtheir programme number. Press Bto use. Press
DforInfo. Press Cfor Setup.
Search Schedule Info Editor
Name On/Off Source Programme N.
BBC1 On TV P 001
BBC2 On TV P 002
ITV On TV P003
CH4 On TV P 004
9Check the TV channels and the allocation to the programme
numbers. Switch between the two tiles using CM,DK.
Select the TV channels using BO,AI,CHANNEL rS,
CHANNEL qP(for page forward/backward)
Oleft tile
Switch the TV channels you want to use to 'On' using the red
function button D.
Don't switch off the GUIDE Plus+®data channel!
Oright tile
For TV channels on the external receiver, press the red
function buttonDto switch to 'External receiver 1'
The press the green function button Eand enter the
programm number for this channel using the 0..9 Xbuttons
(this is the same programme number as you would enter on
the external receiver for this TV channel).
Check that the GUIDE Plus+®data channel is allocated
to the right programme number!
0End using GUIDE/TV J.
Your external receiver is now installed in the GUIDE Plus+®
system.
Initial Installation of the GUIDE Plus+ system