28Manual TV channel search
In some cases, not all of the available TV channels may have been found
and stored during initial installation. In this case, you will need to search
for and store the missing or coded TV channelsmanually.
Preparation:
•) Switch on the TV, and if necessary, select the programmenumber
for the DVD recorder.
•) Switch on the DVD recorder.
1Press the BROWSER HDD Hbutton and then the SYSTEM
MENU Abutton on the remote control.
PThe 'SYSTEM MENU' appears.
2Select 'Set up' using BO.
3Press CMto select 'System'.
4Select the line 'Installation' using BOand confirm with
CM.
PA message appears on the screen that the change of this
setting will flush the 'Time Shift Buffer'.
OIf the 'Time Shift Buffer ' contains importantrecordings, save
them with the REC/OTR n1button first. Refer to the
chapter 'The Time Shift Buffer'.
5Select 'Yes' with DKand confirm with OK L.
OIf the message window was closed, confirm the line with
CMagain.
6Select 'Manual search' using BOor AIand confirm with
CM.
Installation
Manualsearch
Channel/freq. CH
Entry/search 01
Programmenumber 01
TVchannel name BBC1
Decoder Off
TVsystem PAL-BG
NICAM On
Finetuning 0 Tostore
PressOK
7In 'Channel/freq.', select the desired display using CM.
'Freq.'(Frequency), 'CH'(Channel), 'S-CH'(Special/hyperband
channel)
8In 'Entry/search', enter the frequency or channel of the TV
station using the number buttons 0..9 .
OPress CMin the line 'Entry/search' to start the automatic
search.
PA changing channel number/frequency number will appear on
the TV screen.
Continue the automatic search until you have found the TV
channel you are looking for.
9Using DKor CMin 'Programme number', select the
programme number you want to use for the TV channel, e.g. '01'.
0Press OK Lto store the TV channel.
ATo search for other TV channels, begin again at 8.
OChange the name of a TV channel:
-In'TVchannel name', press CM.
- Select the desired character position using DKor CM.
- hange the character at the desired position with BOor
AI.
- Select the next character position in the same way.
- Confirm with OK L.
OChange the TV system of the TV channel:
-In'TVsystem', use DKor CMto select the TV
system that produces the least distortion of picture and
sound.
ONICAM
- If reception is poor and the sound distorted you can turn off
NICAM.
In 'NICAM', select 'Off' using CM.
OFine tuning
- You can try fine tune the TV channel manually with DK,
CMin the line 'Fine tuning'.
BTo end, press SYSTEM MENU A.
Additional installation features