52
OREC/OTR n1:
- To start a recording that will be stored on the HDD.
Please observe : If no data were available from the GUIDE
Plus+®system, the recording will stop automatically after 30
minutes (OTR function). To make longer recordings, you
have to press REC/OTR n1several times. You will see
this also on an information on the screen.
- To mark a title that will be stored on the HDD.
- Hold button down to start the recording from the actual
position.
OButton STOP hN:
- To stop a recording at the live position.
ORed function button D:
- To cancel the marked recording that was set with the
REC/OTR n1button.
- Hold button down to stop the recording at the actual
position.
OYellow function button F:('OVERVIEW')
To display an overview of all contentof the Time Shift Buffer.
OBlue function button G:('MORE INFO'):
To display any additional information for the actual TV show
transmitted by the GUIDE Plus+®system.
Additional playback features

Search by time

During playback of a title from the HDD or recordings in the Time
Shift Buffer, you can search for positions by directly entering the time:
1Press SYSTEM MENU Aduring playback of a title.
PThe system menu appears.
2Press CMin line 'Toolbar' to select 'Options'.
3Press BOto select 'Time search' and confirm with CM.
aIt is not possible to select 'Time search'.
bA title of the Time Shift Buffer is played back thathas no end yet (no
programme change, or TV show is not over yet).
PThe time of the current playback position is displayed.
4Use the number buttons 0..9 of the remote control to enter the
time where you want playback to start.
5Confirm with OK L.
PPlayback starts at the desired position.

Repeat

You can choose the entire title for repeated playback.
1Press BROWSER HDD Hand choose the desired title with
BO,AI.
2Press OK Lto start playback.
3Press the green function button E.
PA symbol appears on the screen to display the repeated
playback.
OTo switch of repeat play press the green button again.
The symbol disappears.

Zoom feature

The Zoom feature allows you to enlarge the video image and pan
through the enlarged image during play back fromthe HDD or from
the Time Shift Buffer.
1During playback, press PAUSE 9Qat the position where you
want to enlarge the picture.
PYou will see a still picture.
2Press SYSTEM MENU A.
PThe 'System Menu' appears.
3Press CMin line 'Toolbar' to select 'Options'.
4Press BOto select 'Zoom' and confirm with CM.
POn the screen arrows appears to indicate the directions.If
neccessary switch on the info bar with INFO C.
5Select with DK,CM,AI,BOthe area you want to
enlarge.
Ozoom in
blue function button G.
Ozoom out
yellow function button F.
OYou can also pan in the enlarged picture using BO,
AI,DK,CM.
6End with the red function button D.
PPlay back starts automatically.
ENGLISH
Playback from the HDD