30Automatic TV channel search
If the channel assignments of your cable or satellite TV provider change
or if you are reinstalling the DVD recorder, e.g. after moving house,
you can start this procedure again. This will replace the stored TV
channels with the new ones.
Preparation:
•) Switch on the TV, and if necessary, select the programmenumber
for the DVD recorder.
•) Switch on the DVD recorder.
1Press the BROWSER HDD Hbutton and then the SYSTEM
MENU Abutton on the remote control.
PThe 'SYSTEM MENU' appears.
2Select 'Set up' using BO.
3Press CMto select 'System'.
4Select the line 'Installation' using BOand confirm with
CM.
PA message appears on the screen that the change of this
setting will flush the 'Time Shift Buffer'.
OIf the 'Time Shift Buffer ' contains importantrecordings, save
them with the REC/OTR n1button first. Refer to the
chapter 'The Time Shift Buffer'.
5Select 'Yes' with DKand confirm with OK L.
OIf the message window was closed, confirm the line with
CMagain.
6Select 'Autom. search' using BOor AI.
7Press CM.
PThe automatic TV channel search starts.This allows the DVD
recorder to save all available TV channels. This proceduremay
take several minutes.
Installation
Autom.search
Searchingfor TV channels
00Channels found
h______________
Pleasewait
PWhen all the TV channels have been found, 'Autom. search
complete' will appear on the TV screen.
8To end, press SYSTEM MENU A.
You can read about how to search for a TV channel manually in
'Manual TV channel search'.
ENGLISH
Additional installation features