65Programming recordings with the ShowView®System
Thanks to this programming system, you no longer need to tediously
enter the date, programme number, start and finish times. All the
information needed by the DVD recorder for programming is
contained in the ShowView®programming number. This 9-digit
ShowView®number is found in most TV listing magazines.
1Switch on the TV. If required, select the programme number for
the DVD recorder.
2Press TIMER s7on the remote control.
PThe 'Schedule' screen will appear
3Press the red function button ('ShowView')D.
If this button is not visible in the menu line or without function, no
GUIDE Plus+®data is yet available. Therefore, you cannot use
programming with the ShowView®system yet.
ShowView Manual Home
Pleaseenter the ShowView programming number
andpress OK to confirm.
=========
Grid Search Schedule Info
Noprogrammes
Once 0
4Enter the entire ShowView number. This number is up to 9 digits
long and can be found next to the start time of the TV programme
in your TV listings magazine.
e.g.: 5-312-4 or 5,312 4
Enter 53124 for the ShowView-number.
Use therefore the number buttons 0..9 on the remote control.
If you make a mistake you can press DKor the green action
button to go back a position.
5Confirm with OK L.
a'Please enter programme number' appears on the
screen
bThis message appears when the TV channel has not been assigned
yet.
Enter the programme number you wish to record from and confirm
using OK L.
aThe following message appears on the screen: 'ShowView
number wrong'
bThe entered ShowView number is incorrect. Repeat the entry or end
with TIMER s7.
bCheck time/date (see chapter 'Installing your DVD recorder', section
'Setting the time & date').
ShowView Manual Home
Pleaseenter the ShowView programming number
andpress OK to confirm.
12345====
Grid Search Schedule Info
/Record Freq. Timing
21-Oct 20:00 21:30 BBC1 Once 0
PThe decoded data appears after confirmation.
You can use the colour buttons to make the following settings.
First, the right tile must be highlighted ( CMbutton). Check
the functions (descriptions) in the corresponding colourfield
before pressing a button.
Activate 'VPS/PDC'
Keep pressing the yellow action button until 'VPS/PDC' appears instead
of the time.
Setting up repeat recordings
You can choose from the following settingswith the green action button:
'Frequency':'Once': single recordings
'M-F': Repeated daily recordings (Monday to Friday).
'Mon': Repeated weekly recordings (every week on the
same day e.g. Monday).
6If all information is correct, press the OK Lbutton. The data is
stored.
7To end, press TIMER s7.
If one or more recordings have been programmed 'TIMER' will light up
on the display.
Programming a recording (TIMER)