54

Flush/erase the Time Shift Buffer

To erase the Time Shift buffer choose from the following:
OErase the Time Shift Buffer manually ('Flush
Buffer'function( SYSTEM MENU Abutton, 'Set
up'menu))
OTurn off the DVD recorder with STANDBY m2.
OThe preset Time Shift Buffer period expires (the default
setting is 3 hours)
OSwitch to camcorder mode using CAM 3(switch back with
the same function button)
Start manual recordings

Starting a recording with data from the

GUIDE Plus+®system

The GUIDE Plus+®system provides the DVD recorder with data on
the start and end time of TV shows. These are shown as black bars on
the time bar.
1In case the time bar of the Time Shift Buffer is not visible on the
screen, press INFO Con the remote control.
2Press REC/OTR n1.
PThe red light around the record button n0on the front
will switch on.
P'1 Programm'will appear on the screen on the right end of
the time bar.
This indicates that the recording will automatically end at the
end of the TV show.
If you want to record the next TV show of the same TV
channel as well, press REC/OTR n1again. '2
Programmes' will appear.
Recording the previous TV show
If the DVD recorder has been switched on for some time, the Time Shift
Buffer already contains recordings. You can select those recordings (TV
shows) that you want to store on the HDD.
-Select the recording using CMor DK(indicator must be
between the markers)
-Press REC/OTRn1to mark the recording.
You can remove the marker by pressing the RED function button D.

Starting a recording without data from the

GUIDE Plus+®system:

If no data is available from the GUIDE Plus+®system, or in case the
recording is made from a satellite receiver connected to the EXT1
TO TV-I/O N,EXT2 AUX-I/O Msocket, the time bar will not
display any data on the beginning, end, and title of the TV show.
1In case the time bar of the Time Shift Buffer is not visible on the
screen, press INFO Con the remote control.
2Press REC/OTR n1.
PThe red light around the record button n0on the front
will switch on.
P'1 Programm +30' will appear on the screen on the right end
of the time bar. This indicates that the recordingwill
automatically end after 30 minutes. Press
REC/OTR n1several times to prolong the switch-off
time.
Recording the previous TV show
If the DVD recorder has been switched on for some time, the Time Shift
Buffer already contains recordings. You can select those recordings (TV
shows) that you want to store on the HDD.
-Select the beginning of the oldest recording with DKor CMand
hold down REC/OTR n1to mark the recording from the
beginning.
-Select the end of the most recent recording using CMor
DKand hold down the RED function button Dto cut off the end.
You can remove the marker using the RED function button D.

Starting a recording from the current

position (from here onward)

You can also start a recording immediately, regardless of the
recordings in the Time Shift Buffer.
1Hold down REC/OTR n1until the red light on the record
button n0at the front switches on.
The red light indicates a actual runningrecording. If a TV show was
marked and the end time is over, no red light appears.
Also if the HDD is full.
ENGLISH
Recording on the HDD