Philips DVDR 725H/00, DVDR 725H/02 21, Setting up the GUIDE Plus+System

21
Setting up the GUIDE Plus+®System
If the GUIDE Plus+®system has not been installed yet, the 'Setup'
screen appears when you press the GUIDE/TV Jbutton. Then you
can start the installation.
1Switch on the TV. If required, select the programme number for
the DVD recorder.
2Press the GUIDE/TV Jbutton on the remote control.
PThe 'Grid' screen will appear.
OIf the 'Setup' screen' appears, select the settings described in
the next chapter and follow the instructions on the screen.
3Press AI. Select the setting 'Setup' with CM. This setting
is located on the second menu page.
Home
Setupyour system to receive GUIDE Plus+ data.
Schedule Info Editor Setup
Setup
ViewDemo
4Select one of the following options using BOor AIand
confirm with OK L.
O'Setup'
Installation of the GUIDE Plus+®system.
Proceed to the next chapter.
O'View Demo'
This runs a demo that introduces you to the functions of the
GUIDE Plus+®system using stored data.
If you start the demo, programmed recordings may be deleted.
By pressing OK Lduring the demo, you can proceed
directly to the setup of the GUIDE Plus+®system.
'Setup'
Setup Home
PressAor Bto select. Then press OK to confirm.
Setup
Chooseitem to set up :
Language English
Country United Kingdom
Postalcode XXXXX
Externalreceiver 1 None
Externalreceiver 2 None
Externalreceiver 3 None
Check the settings displayed on the screen. If necessary,you can
change these. To do so, select the corresponding line with BOor
AI.
'Language'
Here you can change the language for the on-screen menu.
1Press OK L.
2Select the desired language using BOor AIand confirm
with OK L.
The GUIDE Plus+®system supports only 6 languages.
If during the initial installationa language was selected which is not
visible here, the language 'English' will be automatically taken as
language in the GUIDE Plus+®system.
3Press OK Lto return to the 'Setup' screen.
'Country'
Select the country you currently live from the list.The DVD recorder
needs this information to load the right channel list.
1Press OK L.
2Select the country you live in using BOor AIand confirm
with OK L.
3Press OK Lto return to the 'Setup' screen.
'Postal code'
In order to adjust the GUIDE Plus+®system correctly, it is necessary
to know your current location with the TV channels available. Using
the local post code and the country, the DVD recorder can
automatically make the settings.
Initial Installation of the GUIDE Plus+ system