26Allocating a decoder
Some TV channels send coded TV signals that can only be viewed
properly with a purchased or rented decoder. You can connect such a
decoder (descrambler) to your DVD recorder. The following function
automatically activatesthe connected decoder for the TV channel you
want to watch.
Preparation:
•) Switch on the TV, and if necessary, select the programmenumber
for the DVD recorder.
•) Switch on the DVD recorder.
1Use the CHANNEL qPand CHANNEL rSbuttons or the
number buttons 0..9 on the remote control to select the TV
channel for which you want to use the decoder.
OIf necessary, use the TUNER 0button to switch to the
internal tuner.
2Press the BROWSER HDD Hbutton and then the SYSTEM
MENU Abutton on the remote control.
PThe 'SYSTEM MENU' appears.
3Select 'Set up' using BO.
4Press CMto select 'System'.
5Select the line 'Installation' using BOand confirm with
CM.
PA message appears on the screen that the change of this
setting will flush the 'Time Shift Buffer'.
OIf the 'Time Shift Buffer' contains important recordings, save
them with the REC/OTR n1button first. Refer to the
chapter 'The Time Shift Buffer'.
6Select 'Yes' with DKand confirm with OK L.
OIf the message window was closed, confirm the line with
CMagain.
7Select 'Manual search' using BOor AIand confirm with
CM.
Installation
Manualsearch
Channel/freq. CH
Entry/search 01
Programmenumber 01
TVchannel name BBC1
Decoder Off
TVsystem PAL-BG
NICAM On
Finetuning 0 Tostore
PressOK
8Select 'Decoder' using BOor AI.
9Select 'On' with CM.
OTo switch off the decoder use CMto select 'Off' (Decoder
switched off).
0Confirm with OK L.
ATo end, press SYSTEM MENU A.
Your decoder has now been allocated to this TV channel.
ENGLISH
Additional installation features