93Parental level control [DVD]
Films on pre-recorded DVD discs may contain scenes not suitable for
children. Therefore, some discs may contain 'Parental Control' rating
information that applies to the entire disc or to certainscenes on the
disc.
The appropriate scenes have filter values that reach from 1-8. If such a
scene is detected during playback, the filtervalue set on the DVD
recorder is compared to the scene. If the filter value is higher than the
setting, an alternative scene will be played (if available).
Most DVDs apply the rating to an entire DVD. Therefore, if certain
scenes exceed the rating you select, the entire disc will be blocked
from viewing.

Activating/deactivating parental level control

Preparation:
•) Switch on the TV, and if necessary, select the programmenumber
for the DVD recorder.
•) Switch on the DVD recorder.
1Press DISC MENU Band then SYSTEM MENU Aon the
remote control.
PThe menubar appears.
2Select the 'A' icon using DKor CM.
3Press the SYSTEM MENU Abutton on the remote control.
4Select the 'A' icon using DKor CM.
5Select '(Disc features)' using BOor AIand confirm
with CM.
Discfeatures
AccessControl Enter code
Autoresume On
6Confirm 'Access Control' using CM.
7Enter a 4-digit code of your choice. If the code is new, you may
have to enter the code a second time as confirmation.
8Select the 'Parental level' using AIor BOand confirm
with CM. A bar appears to select the parental level.
9Select the appropriate rating using BO,AIor the number
buttons 0..9 .
What do the ratings mean?
Rating 0 (displayed as '--') parental control not active.
Rating 1 (suitable for children)
Rating 8 (only suitable for adults)
What happens if a DVD scene containsa higher level than
the rating set?
If the recorder does not find a suitable alternative, playback will stop
and you must enter the four-digit code.
0Confirm with OK L. Quit using DKand SYSTEM
MENU A.

Changing the country

The set filter values depend on the respective country.It is therefore
necessary to enter the country to which these filter values apply.
Preparation:
•) Switch on the TV, and if necessary, select the programmenumber
for the DVD recorder.
•) Switch on the DVD recorder.
1Press the DISC MENU Band then the SYSTEM
MENU Abutton on the remote control.
PThe menubar appears on the screen.
2Select the 'A' icon using DKor CM.
3Select line '(Disc features)' using BOor AIand
confirm with CM.
Discfeatures
AccessControl Enter code
Autoresume On
4Confirm the line 'Access Control' using CM.
5Enter your four-digit code. If the code is new, you may have to
enter the code a second time as confirmation.
6Select 'Change country' using BOor AIand confirm
with CM.
7Select the corresponding country using AIor BOand
confirm with OK L.
8To end, press DKand then SYSTEM MENU A.
Access control (Child Lock)