Placement Guidelines
Table 3 describes the rear ports and Adapters.
Table
Label Description
6AC Power (Input
7Five 10/100 Mbps
8Reset button. Used only if you need to reset the 2825 to its factory default settings. Insert the end of a paper clip or pin into the hole and hold it in for at least 8 seconds.
9Over the Air Auto Provisioning Button (not active for current release).
Placement Guidelines
The Ruckus MediaFlex Router will automatically adjust, within limits, to room conditions. You can achieve better signal reception by following the below placement guidelines:
Establishing a good general location
Your 2825 should be placed:
•Near the center of the room, if possible.
•On a shelf or other elevated location where other wireless networking devices are within
•Away from other sources of electromagnetic interference (for example, microwave ovens, and cordless phones).
•Away from large metal surfaces, pictures or mirrors, metal bookcases, displays, racks, etc..
•Away from large furniture or other physical obstructions, particularly metallic materials.
Using the Signal Quality LED to Fine-Tune the Placement
Wireless environments are sensitive to the physical arrangement of both electronic devices and furniture in a room. You can observe the Signal Quality Indicator LED to determine the best location. The Signal Quality indicator LED is described in Table 2— “LED Indicators and Meanings” on page 13.
Refer to the troubleshooting section on page 19 if video quality deteriorates after an installation.
If “Minimum Acceptable” or “Marginally Acceptable,” air quality is indicated, you can adjust the location of the 2825 and other devices until a steady green LED indicates “good” signal quality.
Ruckus Wireless 2825 Wireless Multimedia Router | 15 |
